Opiniões dos clientes

4.81 de 5
Escrever uma crítica
  • Todos Comentários (16)
  • Imagem (4)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(16)
    • Estrela(13)
    • Estrela(3)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • 2020-06-24 17:10:40

    Was great for few test welds and then began to sparks fly from PCB, one small transistor melted and few mosfets went hot and bit smoke. I read one review where was similar case like i have, not sure did we just get bad monday items or what. Small minus, does not contain any instructions, for example what led colors means would be great.

    Comentários
  • 2020-10-06 16:46:06

    it works well, using 4S lipo battery. when using first and second level of power, device and battery do not get too much hot, so you could make many spot weldings.

    Comentários
  • Raybo
    US
    2020-08-06 20:40:38

    This board is very nice, and works quite well. So far very happy with this board. The mounting holes are very small. The positive is a 2mm hole, and the negative is 3mm. I made a brass extender for the positive on my Mini Lathe. Used a 3mm brass riser and turned down the 3mm screw end to 2mm to fit the hole on the board. I then soldered this to the board, so I had a 3mm location to mount the positive connection. I had some welding tips from another board that failed, So I used those. Had to use

    Comentários
  • James
    US
    2020-08-01 21:20:12

    Seems to do what I need done using the Red and Green settings. Purple BLOWS holes in 18650 cells. LOL Bet folks would be willing to pay a extra dollar for documented instructions ? I located the Cap on the underside.

    Comentários
  • paul
    GB
    2020-06-12 15:01:57

    not to happy with item no one knows where to solder capacitor! finaley figured it out , worked great firs time then burned out 2 x fets on second try!

    Comentários
  • 2020-09-18 07:54:45

    thank you

    Comentários
  • JayBee
    CA
    2020-06-20 09:27:52

    Works good. Included Instructions would be great.

    Comentários
  • 2020-10-16 09:27:03

    AAA+++

    Comentários
  • 2020-10-07 09:33:46

    Das Design der gelieferten Platine weicht von der Bestellung ab

    Comentários
  • Peter
    AT
    2020-09-02 00:12:07

    noch nicht getestet

    Comentários
Show:

    Go to page

    Go

    Você pode estar interessado em

    recommendation for you
    • US$13.49
    • US$6.99
    • US$11.99
    • US$5.99
    • US$54.99
    • US$17.99
    • US$3.99
    • US$5.99
    • US$4.19
    • US$10.99
    • US$24.99
    • US$1.99
    • US$1.99
    • US$1.99
    • US$7.99
    • US$1.99
    • US$24.99
    • US$14.52