Opiniões dos clientes

4.87 de 5
Escrever uma crítica
  • Todos Comentários (793)
  • Imagem (120)
  • Vídeo (2)
  • Todas as estrelas
    • Todas as estrelas(793)
    • Estrela(702)
    • Estrela(82)
    • Estrela(7)
    • Estrela(1)
    • Estrela(1)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • 2020-03-10 01:16:43

    Ürünün stoğa girmesini beklesem de kargo yapıldıktan 14 gün sonra teslim aldım, gümrük ödemedim. Fotoğraflardaki kasa, iç aydınlatma ve acil stop butonu kendi eklemelerim. iş parçası tutucu 340x160 olsa da 300×180 çalışma alanı var, spindle ucundaki madren kesinlikle işe yaramıyor er11 seti de alın, ürünle beraber gelen alyanlar da hemen sıyrılan cinsten. üründen genel anlamda memnunum madren aldığımda kullanmaya başlayacağım.

    Comentários (2)
  • 2019-12-04 20:45:54

    O produto é ótimo, tive um grande problema com a alfandega, paguei o dobro do valor, por causa da nota fiscal que veio junto com dois conjuntos de brocas, a alfandega tomou como fraude, e cobrou o imposto a mais aplicando uma multa, por causa de uma lei BASE LEGAL DECRETO 6.759/2009 ART. 703 BASE LEGAL DECRETO 6.759/2009 ART. 711 BASE LEGAL DECRETO 6.759/2009 ART. 725 I

    Comentários (2)
  • 2020-02-10 13:39:36

    Nice kit, but there were a few problems on assembly. Z axis lead screw was short, leaving only 32mm stroke and has alot of slack, supposed to be 40mm stroke. Z assembly has 1-2 mm or more looseness and jumps on use. Accuracy of Z is very off from claimed. X and Y axis also are short stroke by 5mm or so. Needs more info on control board and wiring up for limits, probe, etc... Need to contact support on replacing Z axis assembly, just cant use it for making anything accurate. X axis lead screw is also

    Comentários
  • 2019-11-10 12:19:50

    Good CNC router It's an economical CNC router to make wood work. It's an interesting device useful to engrave wood and copper PCB board. There is some excessive play on Z axis, probably by economical material created with a 3D printer. But the other CNC components are economical but running fine without problems. In conclusion a discrete router with a good price/quality ratio. OK

    Comentários
  • 2019-10-29 14:29:30

    Ok, so the included instructions are not good but that is fine if you follow the video. Assembly was pretty simple and after a bit of trial and error I got it working properly. I realised that fastening the aluminum is tricky , just make sure you double check all the fastening and you should be fine. Waiting for the laser to try. Thanks

    Comentários
  • milosh
    HR
    2020-08-30 01:15:17

    My unit came with the ER11 chuck and collet, although I did not order it. Well thank you Banggood! Also, the control board is not like the one in the pictures, it's newer version, with built in Arduino and fan and pwm output. It uses a MOSFET instead of the relay. I'm positively surprised!

    Comentários
  • pantzer
    NL
    2019-12-09 12:56:10

    Mooie machine voor het geld. Het in elkaar schroeven is wat priegelig werk omdat de vierkante moeren soms niet goed draaien. Met een pincet laat het zich wel recht duwen. Endstoppen zou ik niet adviseren omdat deze meteen aan slaan en de machine meteen stopt. Geen Endstoppen gebruiken omdat het geen zin heeft omdat het product dat men gaat gebruiken telkens toch opnieuw moet nullen op de plaats waar het zich bevindt. Kortom mooi product voor weinig geld. Keurig verpakt . Super!! .

    Comentários
  • 2020-01-18 15:07:36

    nice price oi odigies einai gia ton poytso alla ama pianoyn ta xeria sou ola kala mikron apetiseon alla poly kala anabathmisimo kai se megethos sthnn ellada kai me mikro kostos to ekana 30 x 50 me 20 euro !!!

    Comentários
  • 2019-10-31 14:06:53

    Received well in time. Very good quality. The assembly instructions are very basic, but still easy to assemble. It took me about 2 hours to assemble.I found on youtube instructions for installing drivers and software that helped me a lot. Look at the photo, this is my third attemp. A bit slow, it took 6 hours to engrave this.

    Comentários
  • Kg26
    IN
    2020-02-14 10:19:43

    Great machine, Doesn't have proper Mac support but works on Easel. Main DC motor housing was cracked but found a suitable replacement on thingiverse to get printed. Packaging could be better

    Comentários
Show:

    Go to page

    Go

    Você pode estar interessado em

    recommendation for you
    • US$239.99
    • US$188.99
    • US$41.99
    • US$25.99
    • US$3.99
    • US$52.49
    • US$109.99
    • US$45.99
    • US$2.99
    • US$157.99
    • US$5.99
    • US$29.33
    • US$50.99
    • US$38.84
    • US$7.99
    • US$35.99
    • US$169.99
    • US$4.99