Opiniões dos clientes

4.91 de 5
Escrever uma crítica
  • Todos Comentários (173)
  • Imagem (29)
  • Vídeo (2)
  • Todas as estrelas
    • Todas as estrelas(173)
    • Estrela(167)
    • Estrela(2)
    • Estrela(1)
    • Estrela(1)
    • Estrela(2)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • February-15 2018 09:49:26

    These are 1:1 the Airbot Wraith v2's under different branding however same quality. At first sight you can see all those caps, the filtering is amazing. The troughhole soldering pads for PWM, PWM-GND and BLHeli_32 TX make it easier to solder without creating shorts however you should still feel comfortable soldering, they're pretty small after all. Flashed with newest BLHeli_32 and setup to run at 48 kHz PWM frequency. Video signal is crystal clear. Motors run smooth. (I did remove the 1000 uF low

    Comentários (2)
  • October-03 2019 09:44:25

    Tekko ESC Ottimo in accoppiata con il Flight Controll della HOLIBRO. consigliata questa concezione perché ogni esc è indipendente e per iniziare va molto bene (nell'eventualità si dovesse bruciare un solo ESC basterà cambiarlo senza sostituire gli altri funzionanti). la scatola è ben fatto e completa di ogni accessorio per il montaggio (saldatura...)

  • September-13 2018 02:40:14

    - not generating any noise with my emax 2205 motors - makes the motors ruin very smooth - easy to solder - a little big (be carefull when selecting a frame and ESC protectors)

  • October-11 2018 19:33:31

    Just completed a new build with these ESC without adding capacitor. There is no noise running at a 4S lipo with full throttle. No static in the video signal at all. The size of the ESC is a bit bigger than I thought. It's wider than the Armattan Roosters arm as you see in the picture. Otherwise, these ESC is perfect. The LED looks good and it's on both sides of the ESC as well.

  • October-05 2019 23:33:58

    Посылка пришла в срок. На вид все отлично. В комплекте есть все провода, конденсаторы и термоусадка

  • June-25 2018 14:19:06

    Dear Banggood. I was connecting the drone with usb on Butterflight and also with the 4 S lipo. I did this for a few times and it was fine. But now suddenly the ESC just Lit itself on fire. why is that??

    Comentários (2)
  • September-02 2018 01:26:55

    Using these on my latest build with Dshot 1200 and Esc telemetry. Working great. I have them covered with tape and drawing 130 amps but still max temperature goes to only 68 degrees. Very satisfied.

  • July-05 2018 02:00:06

    produit visuellement de qualité pas encore essayé mais Haye de voir si je ressens une diffenrence en dshot1200 !

  • December-25 2018 05:45:29

    These are great ESC only the capacitors on the top are quite fragile to prop strikes. A simple 3d printed ESC protector solves this problem and other ESC on the arms have the exact same problem. I use these protectors to protect my ESC: https://www.thingiverse.com/thing:2903805

  • October-25 2018 10:38:20

    Not tested yet but soldering quality seems TOP.No manual, booklet or instructions. Just a qrcode with Holybro product page But it comes in a sturdy and cool box with quality silicon wires.


    Go to page


    Você pode estar interessado em

    recommendation for you
    • US$16.87
    • US$29.99
    • US$12.79
    • US$75.00
    • US$10.59
    • US$12.83
    • US$11.99
    • US$48.15
    • US$24.27
    • US$12.14
    • US$33.59
    • US$47.22
    • US$37.44
    • US$64.99
    • US$9.02
    • US$12.99
    • US$52.43
    • US$42.28