Uma parte da revisão foi traduzida automaticamente.
tudo como esperado!! A saída 3V é na verdade 3,3V e funciona muito bem com ESP8266 e ESP32 como mini-break
Está bem, está bem
Suporte muito fácil para o 18650 pelo USB de entrada e saída, e múltiplas conexões para 3V e 5V. Perfeito para o Arduino e muitas aplicações Led. Só estou tentando descobrir qual resistor substituir o 5V para 7V para Arduino.
These charger boards are pretty OK. They're well made though one may wonder why they decided to put the LEDs on the bottom of the board rather than on the 18650 side: that's a pretty weird design decision. The markings says 3V but it is actually delivering 3.3V. The switch cuts the power of the USB output plug only, the three 3.3V and three 5V outputs are always ON. Some flux remains on the PCB. I had to bend the clips inside the 18650 holder to avoid the 18650 sleeve getting damaged when removing the battery. Overall, nice boards despite the horrendous and persistent smell of the plastic holder.
Estes módulos de bateria são excelentes. Comprei mais cinco porque são muito úteis.
Estes pequenos módulos de bateria 18650 são realmente bons. Acabei de encomendar mais para usar com as baterias 18650 Eu recentemente limpou de uma bateria de laptop antigo.
Tudo bem Obrigado. Obrigado
seems fine never tested
As peças chegaram à Suíça em 4 semanas. Todas parecem boas, duas peças testadas, funcionam bem.
Bom módulo - ele funciona.