Uma parte da revisão foi traduzida automaticamente.
Muito bem.
These are really nice, and they provide a stable power source at 3V3 and 5V. However, the switch does not appear to have any effect on the power supplied on the solder pads. As such, I'm not sure the undercurrent protection works when using those. I'm using protected 18650 batteries so I don't really care.
Conforme descrito, totalmente carregado.
chegou em boas condições. Espero que funcionem como descrito. A melhor maneira de impulsionar um projeto arduino.
produto muito útil
OK ok ok ok não testado
Este módulo é excelente! 5 e 3,3 v de uma célula Lion. Eu amo isso. Obrigado!
recebido cedo e bem embalado, cada um em sua própria bolsa sem estática. será usado para fornecer energia a alguns microcontroladores para vários projetos. Outras revisões estão corretas de que o switch só ativa/desativa a porta USB. Você pode ver isso se seguir as trilhas do PCB. (Dica - Você deve estar olhando atentamente e inspecionando todos os novos itens eletrônicos usados.) A unidade parece estar muito bem fabricada e todos os componentes são bem soldados e claramente identificados. A forma como eu antecipo usá-los não exigirá uma base, mas você pode considerá-la para espaços apertados ou aplicações que exigem muito movimento, batidas, ou se a unidade for exposta a alta umidade. As várias saídas aceitam pinos de cabeçalho facilmente. Excelente valor para o dinheiro se você receber pacote de 5 unidades. muito feliz e satisfeito!
Already bought five units over four months ago. They all work great, for Arduino projects, led lights, a quick 3.3v / 5v power supply using a single 18650 Samsung 30Q flat top battery. Two drawbacks, 1. SMD components on the bottom of the PCB can be shorted out and get broken off, so you need to add a base plate. A thin piece of wood of plastic. 2. Flat top batteries have a hard time making a good electrical connection. A. need to bend the battery contacts in towards the battery compartment or, B. add a 4x2mm disk magnet to the positive end of the battery or, C. or solder a small brass washer to the positive end of the battery or, D. use button top 18650 batteries. This will help a lot in making the dc to dc step up buck converter more reliable.
Correção