Lâmpada LED de chip SMD infravermelho IR de alta potência de 10W 840-850nm DIY 4.5-5V
Uma parte da revisão foi traduzida automaticamente.
https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series
Nice Night Fly FPV Mod! Needs A large heat sink!!!
Isto é de uma câmara de ninho. Não há luz nenhuma. Tentei usar condutores de chumbo, mas este chumbo matou três deles. Tive de se contentar com uma resistência de 10w de 8,2 ohms. Tempo de execução de 3 a 5 min. Ficam muito quentes. Encaixa bem dentro de uma lanterna Milwaukee M12.
Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out
Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W
De acordo com o anúncio
De acordo com o anúncio
Está bem, está bem
Produit conforme état apparent neuf a tester ultérieurement prix très correct
Very bright LED, pay attention to the voltage! Optimal for night vision systems.