Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (48)
  • Imagem (3)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(48)
    • Estrela(41)
    • Estrela(6)
    • Estrela(1)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Mozambique)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 17/02/2017

    Приобрёл сей девайс для своего байка:сразу по качеству(пластик абс,винтовые соединения металл),сделано качественно,крепко,резьба на штативе стандартная,на фото видно камера прикручена... Вообщем покупкой я доволен,тем более у нас такого не нашёл...

    Comentários
    Mostrar original
  • 14/02/2019

    uchwyt jest bardzo dobry. zero luzów czy trzasków. jest stabilny. Można bez obaw zamocować kamerkę. nic się nie dzieje w czasie jazdy. Za tą cenę polecam. dostawa w 2 tygodnie. Możliwość śledzenia przesyłki.

    Comentários
    Mostrar original
  • 23/08/2017

    Plastic doesn't seems very strong but it's good for the price paid. Let's see if it can hold the first fall ;)

    Comentários
    Mostrar original
  • 12/04/2021

    muito bom obrigado

    Comentários
    Mostrar original
  • 10/10/2014

    Ребяты,это вообще весчь)))! Долго мечтал о таком крепеже! Рекомендую всем у кого есть велосипед,старый фотоаппарат-мыльница и у кого нет денег и желания покупать дорогие экшн-камеры. Сделан качественно! Цена вообще адекватная! Легко крепится на руль,угол наклона фотоаппарата можно менять. Сами смотрите всё тут:http://youtu.be/qriuppthmFo?t=3m38s и тут: http://youtu.be/2uWw7wNvsgY

    Comentários
    Mostrar original
  • 01/01/2018

    It is almost as if this device was copied by someone who does not know about tripod / camera heads and bicycle handlebars. The handlebar clamp does not have the expected quick open. The knob has to be fully unscrewed and removed for the clamp to be fully opened for fitting to the bike. This is not quick by any means. The camera screw and nut are a loose thread. The screw projects more than the camera safe 1/4" so on some cameras it cannot be screwed all the way in without damaging the camera. The lock nut is a loose cut thread - it will not tighten up on the camera. The solution I found is to put a metal washer on the camara screw beneath the lock nut; then tighten the lock nut down onto the washer. This enables the screw to be operated by turning the nut to thread it onto the camera. Without the nut locked onto the screw, the camera must be held and twisted down onto the screw.... not very good at all. With a little thought, the bugs can be worked out. As it comes, it is not quite right. Good value for the hobbyist to fix and use.

    Comentários (1)
    Mostrar original
  • 26/02/2016

    High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!

    Comentários
    Mostrar original
  • 30/09/2018

    looks to be solidly built. have not used it on my bike yet. one drawback is that the mounting nut must be completely unthreaded before the mount can open - a slot would have been nice.

    Comentários
    Mostrar original
  • 20/02/2016

    In all, this bracket is well made, without sharp corners or burrs. Works well as intended. One negative point is its ball joint is very stiff. After loosening nut, the ball joint does not rotate freely. Result is changing camera direction needs some force.

    Comentários (1)
    Mostrar original
  • 15/02/2016

    Realmente no lo he instalado pero físicamente aparenta ser bastante resistente y bien diseñada, gracias a su articulación disminuye el riesgo de romperse al momento de su instalación o retiro. La parte de la cámara queda bastante rígida para soportar el peso de la misma.

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai
    recommendation for you
    • US$84.99
    • US$76.99
    • US$15.99
    • US$13.99
    • US$13.99
    • US$9.99
    • US$2.09
    • US$8.99
    • US$17.99
    • US$6.99
    • US$6.99
    • US$9.99
    • US$11.99
    • US$5.32
    • US$6.51
    • US$15.99
    • US$19.99
    • US$9.99