Fake or reproduction? The manufacturers of this “Little” torch have done their job really well and produced an item that, in my opinion, is excellent both in function and also in price. I have been using this torch every day for a month now and it has proved to be excellent, allowing me to be far more accurate and to solder finer silver wire than I have done before. However, there are a couple of points that I would like to share with buyers before they buy. With the exception of the oxygen and fuel taps being the opposite way around to a genuine “Smith’s Little Torch” there is little to identify the two apart. There is a difference in the tips that are supplied with this torch. This torch is supplied with tips 1-5 instead of 3-7. If you intend to use acetylene then tips 1 + 2 may be useful (these are not fitted with synthetic sapphires as with a genuine Smith’s). I have no intention of using acetylene so I drilled out tips 1+ 2 making them equivalent to tips 6 + 7. This is easy to do and they both work very well. For those buyers that are outside the US, and it doesn’t matter if you are buying a genuine Smith’s torch or one from Banggood, you will have to purchase 2 adapters for attaching the fuel lines to the oxy/propane bottles. This torch comes with a 9/16 connector which is not compatible with UK bottles; a ¼ to 9/16 connector is required. These are readily available and cheap (I paid £5 for the two). I cannot praise this torch enough, so much so that I have purchased a second one! The reason for this second purchase is so that I have a cheap replacement if my first one gets damaged – they are not likely to get any cheaper than the price they are now! I will also have another five tips (which are £23 + each if I wanted to buy them separately from Smith’s) as spares which I could alter? If you are considering buying a “Smith’s Little Torch” you would do well to purchase one of these “reproductions”. If you do, you will have a great “Little” torch that works as good as a genuine Smith’s but is a fraction of the cost! I hope that this is of some help for future buyers?

Fake or reproduction? The manufacturers of this “Little” torch have done their job really well and produced an item that, in my opinion, is excellent both in function and also in price. I have been using this torch every day for a month now and it has proved to be excellent, allowing me to be far more accurate and to solder finer silver wire than I have done before. However, there are a couple of points that I would like to share with buyers before they buy. With the exception of the oxygen and fuel taps being the opposite way around to a genuine “Smith’s Little Torch” there is little to identify the two apart. There is a difference in the tips that are supplied with this torch. This torch is supplied with tips 1-5 instead of 3-7. If you intend to use acetylene then tips 1 + 2 may be useful (these are not fitted with synthetic sapphires as with a genuine Smith’s). I have no intention of using acetylene so I drilled out tips 1+ 2 making them equivalent to tips 6 + 7. This is easy to do and they both work very well. For those buyers that are outside the US, and it doesn’t matter if you are buying a genuine Smith’s torch or one from Banggood, you will have to purchase 2 adapters for attaching the fuel lines to the oxy/propane bottles. This torch comes with a 9/16 connector which is not compatible with UK bottles; a ¼ to 9/16 connector is required. These are readily available and cheap (I paid £5 for the two). I cannot praise this torch enough, so much so that I have purchased a second one! The reason for this second purchase is so that I have a cheap replacement if my first one gets damaged – they are not likely to get any cheaper than the price they are now! I will also have another five tips (which are £23 + each if I wanted to buy them separately from Smith’s) as spares which I could alter? If you are considering buying a “Smith’s Little Torch” you would do well to purchase one of these “reproductions”. If you do, you will have a great “Little” torch that works as good as a genuine Smith’s but is a fraction of the cost! I hope that this is of some help for future buyers?

Fake or reproduction? The manufacturers of this “Little” torch have done their job really well and produced an item that, in my opinion, is excellent both in function and also in price. I have been using this torch every day for a month now and it has proved to be excellent, allowing me to be far more accurate and to solder finer silver wire than I have done before. However, there are a couple of points that I would like to share with buyers before they buy. With the exception of the oxygen and fuel taps being the opposite way around to a genuine “Smith’s Little Torch” there is little to identify the two apart. There is a difference in the tips that are supplied with this torch. This torch is supplied with tips 1-5 instead of 3-7. If you intend to use acetylene then tips 1 + 2 may be useful (these are not fitted with synthetic sapphires as with a genuine Smith’s). I have no intention of using acetylene so I drilled out tips 1+ 2 making them equivalent to tips 6 + 7. This is easy to do and they both work very well. For those buyers that are outside the US, and it doesn’t matter if you are buying a genuine Smith’s torch or one from Banggood, you will have to purchase 2 adapters for attaching the fuel lines to the oxy/propane bottles. This torch comes with a 9/16 connector which is not compatible with UK bottles; a ¼ to 9/16 connector is required. These are readily available and cheap (I paid £5 for the two). I cannot praise this torch enough, so much so that I have purchased a second one! The reason for this second purchase is so that I have a cheap replacement if my first one gets damaged – they are not likely to get any cheaper than the price they are now! I will also have another five tips (which are £23 + each if I wanted to buy them separately from Smith’s) as spares which I could alter? If you are considering buying a “Smith’s Little Torch” you would do well to purchase one of these “reproductions”. If you do, you will have a great “Little” torch that works as good as a genuine Smith’s but is a fraction of the cost! I hope that this is of some help for future buyers?

SMITH(23-1001C) Kit de tocha de soldagem de microbatata de precisão de oxigênio chegou a tempo e ao seu destino com a medição correta sem deterioração ou danos apreciáveis ao produto a caixa com pequeno golpe afundando em uma das estreias esperando para aparafusar a batata e oxigênio a admissão de cilindros para o testar. Parece que tudo está correto a olho nu, vamos testá-lo no trabalho diário para ver seu correto enrolamento, bem como o funcionamento. Um detalhe é que deve transportar outras ligações para garrafas diferentes de acordo com o país, mas penso que isso tornaria o preço final mais caro. - Muito obrigado.

SMITH (23-1001C) Kit de antorcha de soldadura de micro batano de precisión de oxígeno llego en tiempo y a su destino con la medida correcta sin deterioros ni daños apreciables al producto la caja con pequeños hundimiento golpe en uno de los estrenos en espera de enroscar al batano y oxigeno la toma de bombonas para probarlo. Parece que todo esta correcto a simple vista lo probaremos en el trabajo diario para ver su correcto enroscado así como el funcionamiento. Un detalle es que debería llevar otras conexiones para distintas botellas según país pero creo que esto encarecería el costo precio final . Un saludo gracias.

SMITH(23-1001C) Kit de tocha de soldagem de microbatata de precisão de oxigênio chegou a tempo e ao seu destino com a medição correta sem deterioração ou danos apreciáveis ao produto a caixa com pequeno golpe afundando em uma das estreias esperando para aparafusar a batata e oxigênio a admissão de cilindros para o testar. Parece que tudo está correto a olho nu, vamos testá-lo no trabalho diário para ver seu correto enrolamento, bem como o funcionamento. Um detalhe é que deve transportar outras ligações para garrafas diferentes de acordo com o país, mas penso que isso tornaria o preço final mais caro. - Muito obrigado.

llegó super rápido muy buen vendedor buen soplete bien probado

llegó super rápido muy buen vendedor buen soplete bien probado

llegó super rápido muy buen vendedor buen soplete bien probado

I got this set about a month ago and I'm very impressed. It's the very same 'Smith's Little Torch' that sells on Amazon for $135.00 or more, plus shipping. In fact, about 55 years ago, I learned how to weld and braze things with a Smith torch set that my Dad had. The hoses are about 6' long and the hose fittings fit standard oxy/acetylene regulators. (if you ordered the same torch that I did) If you buy this torch you won't be disappointed at all.

I got this set about a month ago and I'm very impressed. It's the very same 'Smith's Little Torch' that sells on Amazon for $135.00 or more, plus shipping. In fact, about 55 years ago, I learned how to weld and braze things with a Smith torch set that my Dad had. The hoses are about 6' long and the hose fittings fit standard oxy/acetylene regulators. (if you ordered the same torch that I did) If you buy this torch you won't be disappointed at all.

I got this set about a month ago and I'm very impressed. It's the very same 'Smith's Little Torch' that sells on Amazon for $135.00 or more, plus shipping. In fact, about 55 years ago, I learned how to weld and braze things with a Smith torch set that my Dad had. The hoses are about 6' long and the hose fittings fit standard oxy/acetylene regulators. (if you ordered the same torch that I did) If you buy this torch you won't be disappointed at all.

I just received my Smith micro torch I porcerer from banggood, when my friends seen me using it they said they were gonna buy one for themselves. thank you

I just received my Smith micro torch I porcerer from banggood, when my friends seen me using it they said they were gonna buy one for themselves. thank you

I just received my Smith micro torch I porcerer from banggood, when my friends seen me using it they said they were gonna buy one for themselves. thank you

produto de boa qualidade, comforme descrito em anuncio tudo ok.

produto de boa qualidade, comforme descrito em anuncio tudo ok.

produto de boa qualidade, comforme descrito em anuncio tudo ok.

Yet to be tested since I need to change the gas-connections first - they're not normal gas-threads and the fuel side is also left-hand thread. However, this seems unlikely to be a genuine Smith product, since apart from the low cost there are also various spelling-errors in the instruction book. Though tips 1-3 are supposed to have Sapphire inserts, I can see no signs of them. The tap knobs are a little off-true, though this doesn't affect operation. Despite the caveats, this is however good value if, like me, you're not going to be using it professionally but will occasionally need a small gas-torch for fine work. It's not top-quality, but will work perfectly well. The needle-valves seem precise enough, and the flame should be well-controlled.

Yet to be tested since I need to change the gas-connections first - they're not normal gas-threads and the fuel side is also left-hand thread. However, this seems unlikely to be a genuine Smith product, since apart from the low cost there are also various spelling-errors in the instruction book. Though tips 1-3 are supposed to have Sapphire inserts, I can see no signs of them. The tap knobs are a little off-true, though this doesn't affect operation. Despite the caveats, this is however good value if, like me, you're not going to be using it professionally but will occasionally need a small gas-torch for fine work. It's not top-quality, but will work perfectly well. The needle-valves seem precise enough, and the flame should be well-controlled.

Yet to be tested since I need to change the gas-connections first - they're not normal gas-threads and the fuel side is also left-hand thread. However, this seems unlikely to be a genuine Smith product, since apart from the low cost there are also various spelling-errors in the instruction book. Though tips 1-3 are supposed to have Sapphire inserts, I can see no signs of them. The tap knobs are a little off-true, though this doesn't affect operation. Despite the caveats, this is however good value if, like me, you're not going to be using it professionally but will occasionally need a small gas-torch for fine work. It's not top-quality, but will work perfectly well. The needle-valves seem precise enough, and the flame should be well-controlled.

Good quality item the couplings did not match my regulators but it was low cost to change them

Good quality item the couplings did not match my regulators but it was low cost to change them

Good quality item the couplings did not match my regulators but it was low cost to change them

I just got my Smith micro torch from banggood.com and I love it, when my friends seen me using it they said they were gonna order one for themselves.

I just got my Smith micro torch from banggood.com and I love it, when my friends seen me using it they said they were gonna order one for themselves.

I just got my Smith micro torch from banggood.com and I love it, when my friends seen me using it they said they were gonna order one for themselves.

Não recebeu mercadorias. Onde está o meu pacote de osder?

it's not received goods..where is my osrder package?

Não recebeu mercadorias. Onde está o meu pacote de osder?