Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (10)
  • Imagem (0)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(10)
    • Estrela(8)
    • Estrela(0)
    • Estrela(1)
    • Estrela(1)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Portugal)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 07/08/2018

    Hi There, Please look the video https://youtu.be/S45nrLa-gJ4 You see 3 issues: 1) During printing several Y-axis drifts occured, that made the printed part unusable. See also the joined picture. We also see that in one place, several layers are missing, as if the Z axis had shifted from several layers at one time. As a result, the part has split in two. 2) Next, you can see that the printer cannot read the micro-SD card. I add that this card connot be reed by none of my computers. 3) Third, the end-thread sensor do not command the pause state of the printer. You see what happen when the end-thread com into the sensor: the blue light turns off, but the thread continue to go ahead and the printer continue to work as if nothing had happend.

    Comentários (2)
    Mostrar original
  • 18/11/2017

    imprimant est arrivé, 1 h de montage, fonctionne, mais il y a des paramètres à réglé, pas pour les débutants

    Comentários
    Mostrar original
  • 11/06/2018

    A près un peu moins d'u mois d'attente, la CR-10 S5 est enfin arrivée. Très facile à assembler, elle a fonctionné 1 h après son déballage. Les réglages sont assez faciles, sauf pour le plateau chauffant, qui par sa grande taille (mais surtout des molettes de réglages trop petites et difficilement accessibles) prend du temps. Ce kit est assez complet, bien que dans le mien, il manquait les pinces pour tenir le plateau en verre.. Sinon, je recommande la CR-10 S5 pour ses grandes qualités d'impression.

    Comentários
    Mostrar original
  • 14/01/2018

    Conforme à livraison, regarder plusieurs tutos pour montage et réglage.

    Comentários
    Mostrar original
  • 10/07/2019

    good printer large and good, screw was loose and a little damaged but fixable

    Comentários
    Mostrar original
  • 09/11/2018

    excellent

    Comentários
    Mostrar original
  • 27/10/2018

    Perfect

    Comentários
    Mostrar original
  • 24/11/2017

    Das Ding ist eigentlich wirklich gut. Nur muss man wirklich jede Schraube kontrollieren. Die Glasplatte muss man ersetzen, da sie nicht eben ist. Die Selektion auf dem Bedienteil lässt zu wünschen übrig.

    Comentários
    Mostrar original
  • 27/12/2017

    The printer I buy have a few problems one is the extruder that is not working and the 2nd problem is the feeder.

    Comentários (1)
    Mostrar original
  • 27/11/2017

    This particular model is supposed to be an excellent machine straight out of the box. IT IS NOT. The bed support springs on one side are thin and too weak to support the bed correctly. The Y-motor is weak to the point that the motor slips during quick small moves, which causes the bed to slowly shift out of alignment, causing EVERY PRINT TO FAIL. Additionally, the glass on the printer is just warped enough that there are only a few true flat spots on it. SO now, not only do I have to buy new springs, I have to buy a new motor for the Y-Axis and a new piece of glass that is made right. The seller doesn't respond to emails, and neither does Creality. DO NOT BUY THIS MACHINE if you expect it to be supported by the manufacturer or the seller. I wasted $1000 and am ready to just never buy from Banggood again.

    Comentários (1)
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai
    recommendation for you
    • US$9.99
    • US$4.99
    • US$134.99
    • US$9.90
    • US$8.99
    • US$34.99
    • US$6.89
    • US$145.00
    • US$199.00
    • US$289.00
    • US$4.61
    • US$282.00
    • US$11.54
    • US$15.99