DIY infravermelho piroelétrico Sensor kits circuito anti-roubo eletrônico Solda placa de prática
Uma parte da revisão foi traduzida automaticamente.
Produto como descrição. Montamos o kit de tinta e testamos bem, funcionando como era suposto. Bom produto. Recomendo.
I do not like writing reviews, but this time I could not miss it. Well, this that the output packet was damaged (a nasty hole) and internal also had broken bottom I assume as a normal transportation risk. See picture 1 what came (left) and what was expected (right). But later - on picture 2 you see the buzzer and its place on the boards - the hole distance is 5-10% larger than necessary. Then, IC2 and IC3 have to be SMD type on the board, sent PDIP type - see picture 3 Also, Rp1 is wrong type - picture 4 Picture 5 is from the product page and shows what is expected to be. To finish, let us return to picture 1, right side, and see the red arrows - even on the product page it was promised what to expect, but I missed it. SO, DO NOT ORDER EXACTLY THIS KIT