Enviar para United Kingdom , USD
Principal crítica positiva para %s em Banggood, Compre o melhor %s com o menor preço na Banggood. Procure as críticas positivas mais úteis sobre %s antes de comprar., brinquedos rc, esportes divertidos, moda, eletrônicos populares
JPDuhen 11/01/2019
To flash, connect GPIO0 and GPIO2 to GND, remove the camera, power it with 3.3V, not 5V. The board needs to be programmed with ESP-IDF as explained in details in Github, https://github.com/donny681/ESP32_CAMERA_QR and there’s no Arduino IDE support. So if you’r not comfortable with using Espressif development framework better skip this board. The demo code takes a QR code, and outputs it as ASCII code in the serial console.
8
Comentários (1)
Enviar
  • Mark Hurley Ihad to power it with 5V to get the camera working properly. And this is compatible with Arduino IDE -- just be sure to add ESP setup beforehand.

    Resposta 08/05/2019
Exame de Satisfação

Faça o download do aplicativo para receber um cupom exclusivo de 10% de desconto