This is a fine radio control for the E55 Eachine. Takes only 3 AAA size batteries and I am using rechargeables and all is well. Easy to use but did come with no instructions and just packed in fine foam wrap and a plastic shrinkable envelope but arrived very quickly and all in tact. Remote joysticks are spring loaded and always return to middle position when you let go. I have found out through trial and error that the right D pad is your trimming up down and left right. When I first got this I had no idea how it worked as they do come without instructions but easy to work out. To get it started just turn on your quadcopter and then the lights will flash. Turn on your controller and you will hear 2 beeps followed by one beep, this means it is ready to pair up. Just push the left joystick all the way up then then down again to the bottom. Ok now to set the blades in action by pressing the "X" on the left D pad. This will get the motors running but not flying yet. All you do then is push up on the left joystick slowly till you reach the height you want then let go and it will stay at that height. The right joystick will go forward and backwards and of course left and right. To trim the quadcopter just use the D pad. ie: if you find it is going left then you trim to the right as you would if it was going forward by itself you press the back D pad button. Smaller than I though however, but I used my LG G5 on the holder and you will find the controller is top heavy with a phone on it so be careful not to drop it as it will be easy to drop, so hold on to the controller tightly.

This is a fine radio control for the E55 Eachine. Takes only 3 AAA size batteries and I am using rechargeables and all is well. Easy to use but did come with no instructions and just packed in fine foam wrap and a plastic shrinkable envelope but arrived very quickly and all in tact. Remote joysticks are spring loaded and always return to middle position when you let go. I have found out through trial and error that the right D pad is your trimming up down and left right. When I first got this I had no idea how it worked as they do come without instructions but easy to work out. To get it started just turn on your quadcopter and then the lights will flash. Turn on your controller and you will hear 2 beeps followed by one beep, this means it is ready to pair up. Just push the left joystick all the way up then then down again to the bottom. Ok now to set the blades in action by pressing the "X" on the left D pad. This will get the motors running but not flying yet. All you do then is push up on the left joystick slowly till you reach the height you want then let go and it will stay at that height. The right joystick will go forward and backwards and of course left and right. To trim the quadcopter just use the D pad. ie: if you find it is going left then you trim to the right as you would if it was going forward by itself you press the back D pad button. Smaller than I though however, but I used my LG G5 on the holder and you will find the controller is top heavy with a phone on it so be careful not to drop it as it will be easy to drop, so hold on to the controller tightly.

This is a fine radio control for the E55 Eachine. Takes only 3 AAA size batteries and I am using rechargeables and all is well. Easy to use but did come with no instructions and just packed in fine foam wrap and a plastic shrinkable envelope but arrived very quickly and all in tact. Remote joysticks are spring loaded and always return to middle position when you let go. I have found out through trial and error that the right D pad is your trimming up down and left right. When I first got this I had no idea how it worked as they do come without instructions but easy to work out. To get it started just turn on your quadcopter and then the lights will flash. Turn on your controller and you will hear 2 beeps followed by one beep, this means it is ready to pair up. Just push the left joystick all the way up then then down again to the bottom. Ok now to set the blades in action by pressing the "X" on the left D pad. This will get the motors running but not flying yet. All you do then is push up on the left joystick slowly till you reach the height you want then let go and it will stay at that height. The right joystick will go forward and backwards and of course left and right. To trim the quadcopter just use the D pad. ie: if you find it is going left then you trim to the right as you would if it was going forward by itself you press the back D pad button. Smaller than I though however, but I used my LG G5 on the holder and you will find the controller is top heavy with a phone on it so be careful not to drop it as it will be easy to drop, so hold on to the controller tightly.

Transmissor (controle remoto) este bateu o recorde na entrega, demorou muito 72 dias pra chegar na região de campinas SP, nem compro + o produto ja conhecia é bom

Transmissor (controle remoto) este bateu o recorde na entrega, demorou muito 72 dias pra chegar na região de campinas SP, nem compro + o produto ja conhecia é bom

Transmissor (controle remoto) este bateu o recorde na entrega, demorou muito 72 dias pra chegar na região de campinas SP, nem compro + o produto ja conhecia é bom

Works great! Binds quickly.

Works great! Binds quickly.

Works great! Binds quickly.

Perfect. thx

Perfect. thx

Perfect. thx

The goods came to me in perfect condition.

The goods came to me in perfect condition.

The goods came to me in perfect condition.

I'm very satisfied

I'm very satisfied

I'm very satisfied

very good

very good

very good

Fantastic

Fantastic

Fantastic

sin comentarios

sin comentarios

sin comentarios

Nothing much to say, the controller works as expected with the quadcopter. Well packed and arrived in the UK in good time,

Nothing much to say, the controller works as expected with the quadcopter. Well packed and arrived in the UK in good time,

Nothing much to say, the controller works as expected with the quadcopter. Well packed and arrived in the UK in good time,