Banggood

teşekkürler banggood çok hızlı ve sağlam geldi

excellent quality for a AUO vtx and camera I love it

На удивление неплохая камера. Брал на вуп. Рекомендую сделать свою антенну, ибо комплектная слишком тяжелая.

Works better than I actually expected it to. it’s a little difficult to see through glares at times but all and all works well for FPS

Take the E010 canopy off, install camera on top of PCB board using mounting foam tape and finally secure with rubber band. For Removability, solder on the included male power lead to the + and - terminals on the PCB board. With stock 150mah 30c battery for the E010, I get 3:30 gentle flight time, or 2:30 VERY aggressive flight time.

The TX01 is the smallest and lightest camera/VTX I own, It's perfect for anyone needing a camera for there tiny whoops, QX90's -105 - 110, etc... You can even install it on a mini racer. In my video, I actually have it on a 190mm frame! Works perfect, albeit I didn't fly very far- Ive been having radiolink tx issues Nonetheless, the 25mW VTX provided me with clear transmission with very little spurts of static. Excellent construction, and an intuitive intreface that makes using it a pleasant experience.

Apparently, the only difference between the TX01 and TX02 is the output power. While TX01 has 25 mW, the TX02 has 200 mW. This should not fool you, theoretically, 200 mW should give you only about twice the range compared to the 25 mW. In my opinion, for indoor flight and proximity park flying will be just perfect the Eachine TX01. It is also a bit lighter and consumes less power.

First FPV cam i've ever bought. The quality is GREAT! Soldered this bad boy onto my Furibee F36 to do some tiny whooping and it was a blast!!!! Very easy to use. Nice quality. Clear image. Does okay outside as long as there's not solid objects in the way. Very light for a 3-5" quad, but adds noticeable weight to small micros. Still a bargain at $9!! I bought 2x and would buy again!!!

Small and lighhtweight. Easy to handle with the 7-seg display and pushbutton. Cloverleaf is a 4-leaf-type which is a little strange for a 5.8GHz TX, but is works fine, also with my PAL-designed FPV ground station. Cable polarity is adapted to Horizon microplanes Lipo polarity now, fine! Focus distance is very narrow (starting at a few cm distance), view angle is very wide (ca. 120°, see uploaded photo) which makes it suitable for indoor FPV use... PCB has lots of welding fluid traces, but everything

When you first open the box, you are amazed at how small it is. You pick it up and can barely feel it in your hand. You power it on and the vibrant blue screen grabs your attention and is very easy to understand. This is a fantastic camera and works excellent for a micro quad like a hubsan X4. There are newer cameras out there but this one has the track record you can count on. One thing i believe could use improving is the antenna. The clover lobes are slightly warped from an ideal arrangement but