Enviar para United Kingdom , USD
Principal crítica positiva para %s em Banggood, Compre o melhor %s com o menor preço na Banggood. Procure as críticas positivas mais úteis sobre %s antes de comprar., brinquedos rc, esportes divertidos, moda, eletrônicos populares
Paul Kroon 14/01/2019
Not for the faint hearted. Yes, it requires soldering of SMD components. This item is more work than the smaller flat rotaters because you need to solder 4 24 pin SMD chips.It is definitely easier than the spheric rotator in which you must also solder the little LED's at the side of a PCB. It is not clear from the description that this model runs on 12V. But it is mentioned on the PCB and in the schematic. Testing can be done on 5V, because it will rotate, and the LED's will light up. But the turning is off. I have yet to find out how to set the clock. One person mentioned that the 1.5K resistors are missing. Yes, but a set of 2.2K resistors are provided instead. Use these. There are NO spare LED's, so be careful not to loose even one. I ordered the blue kit, which has a red LED on the most outwards position. But that LED is not supplied. I took one from my box with spares. Be careful with the LED receiver. Follow the manual as you have not to follow the direction on the PCB. This is mentioned on several places. For the DC female connector you must disobey the manual as it is wrong at that point. Ignore the middle connector. I blew the U4 chip, with the result that LED 5 will not light up. I might repair that later on. Otherwise: a decent kit, but certainly a bit expensive. Oh, and I have not been busy with the reprogramming. All is in Chinese. I have to subtract points for that one. Their appear to be only 3 pre-loaded pictures. Value for price: too expensive, costs 2 points. Quality: for the exchanged resistors, missing outer LED, lack of description on how to set the clock, costs 2 points Appearance: lack of english description on how to replace the code: costs 1 point.
5
Comentários (5)
Enviar
  • gauravsanu Nice and useful review.

    Resposta 22/01/2019
  • Wolfgang Nichtfür schwache Nerven. Ja, es erfordert das Löten von SMD-Bauteilen. Dieser Artikel ist mehr Arbeit als die kleineren flachen Rotatoren, da Sie 4 24-polige SMD-Chips löten müssen. Er ist definitiv einfacher als der kugelförmige Rotator, bei dem Sie auch die kleinen LEDs an der Seite einer Leiterplatte löten müssen. Aus der Beschreibung geht nicht hervor, dass dieses Modell mit 12 V betrieben wird. Es wird aber auf der Platine und im Schaltplan erwähnt. Der Test kann mit 5 V durchgeführt werden, da sich diese drehen und die LEDs aufleuchten. Aber das Abbiegen ist aus. Ich muss noch herausfinden, wie ich die Uhr stellen soll. Eine Person erwähnte, dass die 1,5K-Widerstände fehlen. Ja, aber stattdessen werden 2,2K-Widerstände mitgeliefert. Benutze diese. Es gibt KEINE Ersatz-LEDs. Achten Sie also darauf, nicht eine zu verlieren. Ich habe das blaue Kit bestellt, das an der äußersten Position eine rote LED aufweist. Diese LED wird jedoch nicht mitgeliefert. Ich nahm einen mit Ersatzteilen aus meiner Schachtel. Gehen Sie vorsichtig mit dem LED-Empfänger um. Befolgen Sie das Handbuch, da Sie die Anweisungen auf der Platine nicht befolgen müssen. Dies wird an mehreren Stellen erwähnt. Für die DC-Buchse müssen Sie das Handbuch nicht befolgen, da es zu diesem Zeitpunkt falsch ist. Ignorieren Sie den mittleren Stecker. Ich habe den U4-Chip gesprengt, mit dem Ergebnis, dass LED 5 nicht aufleuchtet. Ich könnte das später reparieren. Ansonsten: ein ordentliches Kit, aber sicherlich ein bisschen teuer. Oh, und ich war nicht mit der Neuprogrammierung beschäftigt. Alles ist in Chinesisch. Ich muss dafür Punkte abziehen. Es scheinen nur 3 Bilder vorinstalliert zu sein. Preis-Leistungs-Verhältnis: zu teuer, kostet 2 Punkte. Qualität: für die ausgetauschten Widerstände, fehlende äußere LED, fehlende Beschreibung zum Einstellen der Uhr, kostet 2 Punkte Aussehen: fehlende englische Beschreibung zum Ersetzen des Codes: kostet 1 Punkt.

    Resposta 09/05/2019
  • Wolfgang HalloPaul Kroon, ich habe deine Bewertung ?besetzt und als Kommentar rein gestellt. Ich hoffe du bist damit einverstanden
    Hello Paul Kroon, I have translated your review and put in as a comment. I hope you agree with it

    Resposta 09/05/2019
  • banggood @Wolfgang Dear customer,
    Thank you for choosing Banggood and sorry for the inconvenience caused.
    Could you please tell us more information about your problem with this link?
    http://www.banggood.com/Contact-Us_hi111
    We will do our best to assist you after we receive the email.
    Thanks for your understanding and have a nice day.
    Best regards,
    Banggood Team

    Resposta 09/05/2019
  • dmalone169 Setting the clock can be done by going changing the display to where the time and date in ring example '22:15:30 -- 05 Month symbol 31 day symbol' then press the play button on the remote. then use the or - button to change the value. Then press the play button for the next value. HH then MM then SS then MM then DD. There is a bug at the seconds setting it will change the month. At the Month setting will change the day. This kit and the other kits similar use pretty much the same software. I currently working on how to change the characters on the display by using the flash program included in the download. Running into incompatibility with USB to serial adapter. Need to get this fixed even to update the software.

    Resposta 25/02/2020
Exame de Satisfação

Faça o download do aplicativo para receber um cupom exclusivo de 10% de desconto