Módulo de sensor de nove eixos GY-91 MPU9250 BMP280 aceleração giroscópio bússola
Uma parte da revisão foi traduzida automaticamente.
Works! Included: Adafruit_BMP280 library and SparkFunMPU9250-DMP library. To let an ESP32 with OLED work together with BMP280/MPU9250 is a bit tricky, you have to use the following pins and I2C addresses: const uint8_t I2C_SDA_PIN = 5; const uint8_t I2C_SCL_PIN = 4; const uint8_t I2C_ADDRESS_BMP280 = 0x76; const uint8_t I2C_ADDRESS_MPU9250 = 0x68; const uint8_t I2C_ADDRESS_OLED_DISPLAY = 0x3C; You have to modify both libraries to use the pins above (and not the standard ones) for ESP-32-with-OLED, because the OLED requires already usage of PIN4 and PIN5.
Shipping really fast. The board works as expected. It is nice to have 10DOF in a single board. I replaced the MPU6050 with this board for a camera stabilization system. An article here: https://lemariva.com/blog/2018/06/micropython-camera-stabilisation-application You can find the open-source code: https://github.com/lemariva/uPyIMU It's a nice and simple project that combines: ESP32, 9g Servo Motors and the GY-91. All items bought here in Banggood! Here a Video: https://youtu.be/oNTScnM_1qg
Estou em boas condições, ainda não tentei, mas está bom.
Funciona bem
Obrigado pela entrega rápida, produtos muito bons
Estou muito satisfeito com os dispositivos.
Tudo parece muito bom. Ainda não foi testado
É um produto interessante a um preço razoável.Eu ainda não fiz testes extensos, mas parece bom. A embalagem era essencial, mas o produto era entregue em boa forma.
super!
Good. received as description.