Principal crítica positiva para Controlador de vôo em Banggood Portugal|Fazer compras Portugal

HAKRC 16x16mm Flytower F4 2S Controlador de Vôo AIO OSD BEC & 2S10A BL_S ESC 4in1 para RC Drone US$32.67 US$33.74 View It

Geral:

Polizyste 29/05/2019

Does work like a charm on 2S with Ldarc 1103 Motors on DShot600 with 8kHz/8kHz Looptimes and Kingkong 65mm Props. BEC delivers enough Power for Runcam micro swift and 200mW VTX. After 8 batteries nothing to complain about. Super smooth, I absolutely love the feeling. Compared to an 20x20 stack you have a big weight saving on this. Sbus was on UART2 on the RC-pin. OSD is also working. Stack needs a good ventilation. On bench test it gets quite hot so give it enough air. For the price it does a perfect job!

Comentários (9)

Enviar

MightyMon HiPolizyste. trying to get SBUS working. What do you mean by UART2 on RC-pin. Isn't UART2 in Betaflight the RX2 pin? And isn't RC-pin UART1?
Resposta 09/06/2019

Enviar
Polizyste I didn't change anything from the stock settings. Just soldered to RC-pin and changed to Sbus iin configuration. Serialrx was activated on UART2 in betaflight. Rx2 didn't work for me.
Resposta 15/06/2019

Enviar
georgelagardo DearPolizyste, please tell me if the arrow printed on the flight controller is actually points to front, because my flight controller is showing wrong orientation when i point the arrow towards front . and i need to add 270 deg in yaw to correct it.
Resposta 03/07/2019

Enviar
Polizyste I didn't really care about the orientation. I oriented for ideal wiring (short wires) and changed the orientation like you. After remapping the Motor signals in CL in Betaflight everything was fine. I think the orientation wasn't preprogrammed right from factory!d
Resposta 14/07/2019

Enviar
BG484844112 what firmware do u use?
Resposta 31/07/2019

Enviar
Polizyste I'm still doing very fine on latest stable release of BF v3. Didn't try v4 yet. Target should be hakrc f411 like said in the description.
Resposta 03/08/2019

Enviar
ChristianHilario Hey Polizyste, what frame are you using? I installed this in a FullSpeed Toothpick frame with 1103 7800kv and HQprop 65mm. It flies fine for about 30 seconds then falls to the ground. Motor keeps running "fine" but won't lift off.
Resposta 20/09/2019

Enviar
Polizyste I also noticed this problem using 2S on 1304 Motor loaded with 3" props at 96g AUW. If possible you should Upgrade to 2S lipo (lower amp Draw). I only noticed this issue while hovering, no Problems when flying acro, so I think it's an overheating protection.
Resposta 05/12/2019

Enviar
Polizyste I also noticed that the amp with all the new functions of BF v4 activated is much Higher than Stock setting in BF v3!
Resposta 05/12/2019

Enviar

Ver mais

Nossa Empresa	Entre em contato conosco	Pagamento & Envio	Programas de Parceria
Sobre a Banggood.com garantias e política de devolução Termos de uso Política de Privacidade Reivindicação de Propriedade Intelectual Mapa do site	Entre em contato conosco Guia do Usuário Novo Central de ajuda Assuntos Especializados	Métodos de pagamento Guia de Transporte Locais para onde enviamos Tempo estimado de entrega Instrução de BGpay	Programa de Fashion Blogger Programa de Afiliados Programa de Atacado Entrega direta clube de revisão

Nossa Empresa

Entre em contato conosco

Pagamento & Envio

Programas de Parceria

Sobre a Banggood.com garantias e política de devolução Termos de uso Política de Privacidade Reivindicação de Propriedade Intelectual Mapa do site

Entre em contato conosco Guia do Usuário Novo Central de ajuda Assuntos Especializados

Métodos de pagamento Guia de Transporte Locais para onde enviamos Tempo estimado de entrega Instrução de BGpay

Programa de Fashion Blogger Programa de Afiliados Programa de Atacado Entrega direta clube de revisão