Opiniões dos clientes

4.72 de 5
Escrever uma crítica
  • Todos Comentários (425)
  • Imagem (43)
  • Vídeo (1)
  • Todas as estrelas
    • Todas as estrelas(425)
    • Estrela(364)
    • Estrela(31)
    • Estrela(11)
    • Estrela(8)
    • Estrela(11)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (United States)
  • 30/10/2020

    Tenho de o adaptar ao controlo remoto que tenho.

    Comentários
  • 28/04/2017

    The screen was as advised designed for a different device however with a small trim of the bits not required and some two sided sticky tape and a small amount of super glue it was fitted within 15 minutes. I note others commenting regarding difficulty or not made to fit but this is clear in the sale information, D.I.Y fitting adjustment. I would reccomend this to others who are capable of the fitting process.

    Comentários
  • 03/10/2016

    I got different version than depicted in add. It is wider than space allocated on transmitter for about 6 mm and it it is taller for almost same amount. Can it be fixed to transmitter as it was intended without using hot glue and messing up your transmitter and making modification permanent? In short answer is YES Is it lot of work IT depends on version you get if you get one in picture then it is less work if you get one like mine than it is more work. It took me around 2 hours to fit it properly to the transmitter. What to say about product it is of decent quality nothing to write home about but it'll work as intended once you manage to attach it. Plastic is decent at least it does not stink or smell. When mounted it is a bit difficult to open so I added a pull tab. Still need to figure out top locking tab (for now duct tape is holding it in place) Sorry for bad pictures phone is acting up

    Comentários
  • 21/06/2018

    Like others I hadn't noticed the part in the listing which specifies the need to adjust the part to fit the Hubsan controller. Not wanting to use glue or alter the part, I tried something and found a solution which others may find of interest. If your controller came with the Hubsan shade part (non-foldable), this part can be attached to the rectangular base of the Hubsan part, which then can attach to the controller. Please see the images to see what I mean. It's not completely secure, could be prone to falling off, and I've yet to try it in the field. But some may find it a more agreeable alternative to permanently altering the part/controller.

    Comentários
  • 19/01/2017

    Item fits the Remote well with minor modification. You need the cut the 3 plastic prongs that protrude out, then align it to the screen and hot glue it. Love it works freaking good. Pictures attached.

    Comentários (1)
  • 08/09/2016

    this porduct dont fix for this transmiter is to big and have Mount nuts in wrong place. hod is 7,5 mm to Long, look Picture. is 115,77 mm Long, and place in transmiter have only 108,28 mm

    Comentários
  • 13/09/2018

    Este producto no está diseñado para el control H901A del H501S, pero como dice en la página del producto se puede adaptar. La adaptación queda y funciona pero no es perfecta... De cualquier manera este parasol mejora la transportabilidad del control.

    Comentários
  • 23/04/2017

    I got one for my H501S standard TX and liked it, so naturally I ordered one for my H502S standard. To attach it, I used VHB tape rather than messy hot glue. Nothing to blob around or stick out. Four small strips is all it takes.

    Comentários
  • 13/03/2017

    Buen material, lo único hay que adaptarlo porque no coinciden los enganches. Hay que sacarles los enganches que trae(foto) y luego pegarlo con un adhesivo instantáneo a la emisora, yo lo hice así y me quedo perfecto.

    Comentários
  • 13/07/2016

    I did not see the important sentence "Can be used, but do not exactly match, need to modify, DIY" in the product description. So first I was disappointed, because it did not fit the H501S radio control. BUT on the other hand the opening/closing mechanism is really fine and I don't know an alternative. So I attached the anti-glare shield with a bit of white hot glue. Not beautiful, but it works fine! And what is more I could still use the lanyard though it fits tight now.

    Comentários
Show:

    Total 0 Páginas

    Vá para página

    Vai
    recommendation for you
    • US$39.58
    • US$59.99
    • US$6.99
    • US$8.99
    • US$9.99
    • US$11.99
    • US$7.99
    • US$15.99
    • US$17.99
    • US$9.99
    • US$12.99
    • US$22.46
    • US$21.99
    • US$13.99
    • US$29.99
    • US$8.47
    • US$33.99
    • US$9.99