Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (35)
  • Imagem (13)
  • Vídeo (1)
  • Todas as estrelas
    • Todas as estrelas(35)
    • Estrela(35)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Portugal)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 26/04/2019

    Very good frame: iFlight XL8 with Original Airbot Omnibus F4 Pro V3 (Firmware Arducopter 3.6.6), Original Airbot Typhoon 4 in1 S Race ESC, FrSky VS600 5.8G 48CH VTX, Matek Systems M8Q-5883 SAM-M8Q GPS, Racestar BR2312 960KV , FrSky R-XSR Ultra, Foxeer Predator V3 16: 9/4: 3 Mini FPV Camera, 8 x 4.5 Inch SF Propeller, Lipo 3S 3000mAh 15C. Flight time 22 min.

    Comentários
    Mostrar original
  • loke3p
    BE
    04/11/2018

    Vous souhaitez faire du FPV long-range? ce châssis 8 pouces aura tout pour vous séduire. Excellente qualité générale et usinage du carbone nickel ! Reste encore à voir comment il résistera aux crashs :) Review complète de la frame sur http://papyrc.com/index.php/2018/11/04/iflight-xl8-v3-la-polyvalence-au-service-du-long-range/

    Comentários
    Mostrar original
  • 03/05/2019

    if I’m not mistaken I believe the one I have is made incorrectly. the screws below should fit into the center of the arms and not the middle the last picture is taken from the site

    Comentários
    Mostrar original
  • 05/07/2019

    The quality of the frame can be seen in the elegant packaging. Good workmanship and fitting accuracy. Unfortunately, the description for the assembly is incorrect. Therefore only 4 stars.

    Comentários
    Mostrar original
  • 05/02/2019

    Пришла рама на восемь дюймов. На дальнолёт самый раз. Качество на твёрдую четыре. Края лучей обработаны очень хорошо. Понравилось несомненно! Рекомендую!

    Comentários
    Mostrar original
  • 08/09/2019

    Dieses XL8 Frame ist absolut grossartig, sehr gut verarbeitet und top Qualität. Ich konnte die meisten 3D-Druckteile von meinem XL7 verwenden, die Racestar AirA 2508 1200 KV sind die idealen Motoren dazu. Mit 6S 1300 und den KINGKONG/LDARC 7040 komme ich auf 8-10min Flugzeit. Die Foxeer Lolipop V3 und das Beitian BN-880 GPS Module garantieren mir grossartige Longrange Erlebnisse. This XL8 frame is absolutely great, very well made and top quality. I could use most of the 3D printing parts of my XL7, the Racestar AirA 2508 1200 KV are the ideal engines for that frame. With 6S 1300 and the KINGKONG/LDARC 7040 I come to 8-10min flight time. The Foxeer Lolipop V3 and the Beitian BN-880 GPS modules guarantee great long-range experiences.

    Comentários
    Mostrar original
  • 06/05/2019

    Der mit Abstand beste frame in Qualität und Stabilität den ich je gesehen hab. Sehr zu empfehlen

    Comentários (1)
    Mostrar original
  • due44
    DK
    20/03/2019

    this is the nicest in the best made frame I ever put together all the cuts are done properly all carbon fiber has rounded edges this is amazing good quality I would recommend it to everybody 👍

    Comentários
    Mostrar original
  • 07/02/2019

    Good quality carbon, it's stiff an nicely cut. downside are the press nuts, it's a pain in the @ss to get them in. (I used a vice to press them in) People are saying this frame will fit 9" props, it does NOT. 8" is the maximum size (no problem for me though)

    Comentários
    Mostrar original
  • 16/01/2019

    Great quality but wished they already installed the press fit nuts, all 8 of them.

    Comentários (1)
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai

    Você pode estar interessado em

    recommendation for you
    • US$13.79
    • US$12.99
    • US$73.99
    • US$15.99
    • US$42.54
    • US$12.69
    • US$19.62
    • US$21.99
    • US$24.14
    • US$6.99
    • US$6.30
    • US$12.99
    • US$13.79
    • US$9.99
    • US$6.89
    • US$47.99
    • US$39.99
    • US$32.99