Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (270)
  • Imagem (41)
  • Vídeo (3)
  • Todas as estrelas
    • Todas as estrelas(270)
    • Estrela(257)
    • Estrela(11)
    • Estrela(2)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Portugal)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 01/11/2016

    Отличная рама, сам пластик и штамповка ровные и качественные. Моторчик входит без проблем и сидит плотно. На нижней стороне "ножки" мягкие, силиконовые - довольно упругие Дождусь контроллер и в полет!

    Comentários
    Mostrar original
  • 22/01/2017

    I did not like the induct system on the Eachine Bumble bee 95, so I got this king kong 100 frame transferred everything over from the bumble bee, including the canopy, minus the props, I bought some 3 blade props to use and the thing soooooo much better with this setup.

    Comentários
    Mostrar original
  • 21/08/2019

    Light enough, and maybe more durable than Carbon fiber. I built mine as just a flyer without FPV. First I set it up with a simple Blade Nano QX board, but later I swapped it for a Beecore F3 EVO Acro board so I could fly stunts. Part of the motor is enclosed in housings, so watch motor temps (reduced air cooling). Plenty of room for 65mm props. I set mine up a bit differently than Bang Good shows, with my battery slung underneath. .. See photos. If I mount a cam later, I'll use an Eachine TX01S or similar, with the cam up front and the separate VTX mounted on the tail.

    Comentários
    Mostrar original
  • beppe
    IT
    01/04/2017

    ottimo frame per mini quad FPV con motori 8x20

    Comentários
    Mostrar original
  • 31/01/2018

    Now i have 6x of these King Kong Q100 micro racer. They are extremely durable frame, smashed, wacked and bashed like no tomorrow and still holding well with minor chips, scraps or cracked around the rotor placeholder which can easily fix with glue or zip ties. Easy to to add flight controller, FPV units in any configuration with or without canopy. The are also hansomely looks goodsin apppearance, some people mistakenly identify it as baby DJI Spark, lol.

    Comentários
    Mostrar original
  • 06/02/2017

    It arrived very well with time and in excellent conditions, the product fulfills all its functions mentioned, 100% recommended for the projects and products made.

    Comentários
    Mostrar original
  • 28/01/2017

    nickel, livraison rapide et très bien emballer. matériel irréprochable et site a conseiller.

    Comentários
    Mostrar original
  • 08/11/2020

    Muito bom construir drone escovado. É muito leve e tem espaço suficiente para peças. Tem uma pequena dificuldade técnica para decidir unidades... fc, cam, vtx etc...

    Comentários (2)
    Mostrar original
  • 04/11/2016

    This is a very cool diy frame, you can build an qx90 or qx95 on to this frame. The cam hole is a little tight and needs cutting. But the strength of the frame feels nice, also do the little rubber knobs on the landing gear.

    Comentários
    Mostrar original
  • 06/06/2019

    Delivery on expected time to India, Build quality is good, very fulfilled

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai
    recommendation for you
    • US$47.99
    • US$39.99
    • US$96.99
    • US$20.99
    • US$87.99
    • US$66.99
    • US$75.49
    • US$21.38
    • US$11.50
    • US$63.99
    • US$68.99
    • US$66.99
    • US$17.99
    • US$29.99
    • US$75.99
    • US$56.99
    • US$80.49
    • US$16.99