LDARC / Kingkong Flytower 20x20mm 12A BLheli_S ESC e Omnibus F4 FC AIO OSD e VTX 48CH 0/25/100/200mW
Uma parte da revisão foi traduzida automaticamente.
The flytower comes with screws, nuts, spacers and cables. Everything is well wrapped and in a nice little box. The build is easy and the cables are labeled, so it is easy to identify the connections. I use this stack with an 80 mm frame and 4 T-motor F10 1104 7500KV 2-3S Brushless Motors on 2s. Flies extremely well. Every part of the flytower can be bought seperate.Very practical, if you need a spare part.
Amazed with the performance of this little guy. 12A ESCs are a bit to small for powerful 1106 motors. Replacing it for the 20A version. VTX is fantastic, able to output 600mW, that's CRAZY! Flight controller has anything you need and the gyro runs at 8 Mhz. Comes with all the accesories you would need (screws, spacers, leads...) 100% recommend.
i like it and works perfectly
small but simple
great stack with all the small power you need. 20x20 for great in my 3" build. easy to put together. easy USB and button access from the sides.
Extremely easy to install. Flies extremely well. Very light weight. I have mine installed on a Flex RC Ascent 4 inch frame with dys 1306 3100 kv motors. Gemfan 4045 two-bladed props. 3s 1000 mah 30C batteries. Whole quad weighs 214 grams with battery installed. Am getting over 12 minutes of flight time if I take it easy on the throttle. Highly recommend.
será usado na minha versão 2.5
Buensima!!!
another great part
Tudo conforme descrito e combinado