Opiniões dos clientes

4.99 de 5
Escrever uma crítica
  • Todos Comentários (73)
  • Imagem (3)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(73)
    • Estrela(72)
    • Estrela(1)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Mozambique)
  • October-07 2017 05:57:45

    Perfeito para a ANET A8. Recomendo

    Comentários
  • April-20 2018 11:09:26

    Заказывал для постройки своего 3D принтера. Пришло быстро. Товар качественный. Рекомендую!

    Comentários
  • November-14 2017 21:30:15

    Looks like it will work!

    Comentários
  • October-05 2020 16:08:05

    good

    Comentários
  • April-17 2016 05:40:48

    Like my review title says, these are perfect for all metal hot ends that clog. I bought a cheap <$15 All Metal E3D clone that kept clogging all the time. I replaced the standard threaded tube with one of these and it no longer clogs at all. I did have to file the top ~5mm of threading off to fit my hot end. That was easily achieved by putting this in a drill and taping the button down and going to town with a file.

    Comentários
  • groyve
    DE
    January-11 2016 14:57:53

    Good quality at an excellent price! The integrated PTFE tube is fixed by the steel tube which is clamped a little bit at one end. The other end is much more narrow, so there is no fear that the PTFE tube gets torn out of the steel tube during retract or when your PLA jams in the hot end, a problem I had with my original extruder pipe. The only drawback is its stability. If the drill hole of your extruder is not perfectly rectangular, you can brake the extruder pipe easily when fastening it too tight

    Comentários
  • November-20 2015 23:44:41

    Bought this to replace my current extruder pipes. Great for printing PLA. Have not tried with ABS yet. I am looking for the replacement teflon tube inside this pipe.

    Comentários (1)
  • September-05 2016 07:24:39

    I used these heatbrakes for my E3D clone and they work perfect. One of the brakes I bought had some metal left from production process. Keep an eye on that, otherwise you cant beat this product for the price.

    Comentários
  • October-03 2015 08:10:23

    If you have some trouble using a full metal heat break try this one. The inner tube seems properly made, although I changed it. The metal part seems perfect.

    Comentários
  • February-12 2019 07:25:25

    produits ne correspond pas du tout a la commande après chat renbousement de 300 points (je ne sais pas si il ont été ajoutés a mon compte.

    Comentários
Show:

    Total 0 pages

    Go to page

    Go
    recommendation for you
    • US$9.75
    • US$7.72
    • US$1.29
    • US$1.42
    • US$1.35
    • US$7.87
    • US$2.56
    • US$2.37
    • US$3.99
    • US$3.24
    • US$259.00
    • US$206.00
    • US$299.00
    • US$209.00
    • US$399.00
    • US$34.99
    • US$21.48
    • US$1.40