Opiniões dos clientes

Escrever uma crítica
  • Todos Comentários (150)
  • Imagem (11)
  • Vídeo (0)
  • Todas as estrelas
    • Todas as estrelas(150)
    • Estrela(146)
    • Estrela(4)
    • Estrela(0)
    • Estrela(0)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
Comentários apenas do seu país (Portugal)
|
Mostrar original

Uma parte da revisão foi traduzida automaticamente.

  • 11/07/2021

    Funciona melhor com o programa Esp-rid

    Comentários
    Mostrar original
  • 12/06/2016

    I got this to work with the HSU mode on an Arduino Mega 2560 clone (Banggood SKU: 928760) using the software link in the PDF from another review here. At first I had tried it with the Adafruit PN532 library on an Arduino Nano clone in I2C mode. It recognized the PN532, but I could get the reader to detect a tag only after minutes of waving the tag in front of it. I suspect if you want to use I2C mode, you also need to connect an IRQ line (so you need an extra wire). However, if all you have is an Arduino Uno or Nano or similar you may have to try this, as these boards do not have the extra UART needed for HSU mode. In any case, after getting it to work, the reader can recognize the big tag at 0 to 3.5cm distance, and the keychain tag at 0 to 2.5cm distance. This is not spectacular, but quite acceptable. For comparison, my smartphone (Samsung Galaxy 5 Neo) needs the tags within ca. 1.5 cm and 1 cm to recognize them. I think if you want to experiment with the PN532, the value for price is excellent because the PN532 chip alone will cost you more at a regular electronics distributor such as Farnell.

    Comentários
    Mostrar original
  • 24/05/2016

    Se puede encontrar un completo manual de otro muy similar (cuando no idéntico) en https://dangerousthings.com/wp-content/uploads/2013/12/PN532_-Manual_V3.pdf. You can find a complete manual of another very similar (if not identical) in https://dangerousthings.com/wp-content/uploads/2013/12/PN532_-Manual_V3.pdf

    Comentários
    Mostrar original
  • 28/05/2018

    Received item in just less than 2 weeks in india. it's working good. just needed to change the switch mode to i2c (1 0) to work with i2c. by default it is not set to i2c. item looks pretty cool satisfied buying this.

    Comentários
    Mostrar original
  • 08/02/2018

    Came in good condition but i couldn't find necessary libraries to make this work. I found some libraries but they don't work with it. Not easy to use as RC522.

    Comentários
    Mostrar original
  • 18/01/2017

    Premetto che i piedini non sono saldati, è necessario usare un saldatore. Ci ho perso un'ora, ma non sono riuscito a farlo lavorare in modalità I2C, solo in SPI. Comunque funziona, peccato che non legge molti tag NFC, avrei dovuto leggere meglio la descrizione.

    Comentários
    Mostrar original
  • 03/08/2016

    Nice product. I connected it via UART and an Arduino UNO but you can also use FTDI chip. Works instantly on Linux.

    Comentários
    Mostrar original
  • 17/11/2019

    bello e completo

    Comentários
    Mostrar original
  • 15/08/2019

    i gonna uses doe me front door

    Comentários
    Mostrar original
  • 13/11/2017

    The quality of the board is excellent. I tried to read some RFID card and it's working at distance of 5-3 cm. Great value.

    Comentários
    Mostrar original
Show:

    Total 0 Páginas

    Vá para página

    Vai

    Você pode estar interessado em

    recommendation for you
    • US$14.94
    • US$69.99
    • US$5.99
    • US$13.99
    • US$41.57
    • US$9.99
    • US$16.50
    • US$38.00
    • US$9.23
    • US$6.99
    • US$3.99
    • US$9.99
    • US$7.99
    • US$4.59
    • US$43.19
    • US$7.99
    • US$29.99
    • US$116.99