Opiniões dos clientes

4.88 de 5
Escrever uma crítica
  • Todos Comentários (152)
  • Imagem (15)
  • Vídeo (1)
  • Todas as estrelas
    • Todas as estrelas(152)
    • Estrela(145)
    • Estrela(3)
    • Estrela(0)
    • Estrela(0)
    • Estrela(4)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • hAKi
    2020-05-08 10:29:39

    Great thing, I ordered another one to also make a RF generator for a friend. In the first case, the internal reference deviated a little, but in the latter case it did not. Since the temperature stability of the oscillator is satisfactory, there is a simple solution. The oscillator frequency is measured and this value is entered into the SW. The CE pin must be HIGH for proper operation. We can connect it to 3.3V, but it is better to select a free pin on the processor, set it to HIGH and connect it

  • hAKi
    2020-04-23 08:41:35

    Excellent product, works as expected, I already order another one. The internal 25MHz reference is not very precise and stable, I recommended to use an external 10MHz reference to get a very precise frequency. But altogether, I am very pleased with product!

  • LMP
    2020-01-30 16:36:34

    OK, excelente qualidade...

  • 2017-07-22 14:33:06

    Base on Analog Devices ADF4351 PLL generator IC it is good substitute for much more expensive development board. You will need to program it over I2C bus from some 3.3V development board thou. There is plenty of Arduino UNO projects, but I suggest use of Arduino DUE or some other 3.3V-Ready boards.

    Comentários (2)
  • mapo58
    2017-11-21 13:42:06

    I control this module via Arduino nano,sketch from http://f6kbf.free.fr. It works fine, I check it from 50 MHz to 2.4 GHz with no problems. Good choice!

    Comentários (1)
  • 2019-06-30 02:48:29

    A good PLL synth. The ADF4351 from Analog Device is a PLL synthetizer capable of generating frequency from 35 MHz to 4.4GHz with very low jitter. A useful toy for a radio amateur.

  • Stefan
    2019-07-19 11:26:06

    Lässt sich leicht mit einem Arduino ansteuern. Dabei unbedingt beachten, dass die Eingänge nur 3.3V vertragen! Also für Data, Clk und LE dreimal je einen Spannungsteiler aus einem 1.8k und einem 3.3k Widerstand zwischen schalten. Muxout ist ein Ausgang und kann direkt verbunden werden. Außerdem muss CE mit 3.3V verbunden werden, sonst reagiert das Modul nicht!

  • marian
    2018-08-31 10:41:12

    The adf4351 module, returned, works great. In the photo is clearly seen the frequency commanded by arduino, the LED lit for PLL on the mode and the lit, squelch, KVS-1P, but also the old module that did not work. All the materials are bought from BG. The application is F1CJN's and is freely available, being mentioned in BG's rewievs.  Thanks BG for understanding BANGGOOD is GOOD!

  • 2017-12-22 04:38:14

    работает все отлично. гармоник сигнала много правда. для работы в радиоэфире нужны будут фильтры.

  • beamrx5
    2019-04-28 00:30:54

    1ST OFF, NOT PROPERLY PACKAGED! yes its in an antistatic bag other than that, no bubble wrap or foam padding. whats up with the packaging with no protection, banggood?


    Go to page


    Você pode estar interessado em

    recommendation for you
    • US$14.99
    • US$9.99
    • US$8.99
    • US$13.99
    • US$14.99
    • US$15.99
    • US$22.99
    • US$4.99
    • US$26.72
    • US$10.99
    • US$12.99
    • US$5.55
    • US$9.99
    • US$17.99
    • US$13.99
    • US$6.99
    • US$22.38
    • US$8.99