Bought this heating element as spare one for YIHUA 908D soldering iron. There is no any information about this heater on the banggood.com site as well as in the package. Here I present results of my measurements. The ceramic rod sizes: outer diameter is 3.76 mm and full length without wires is 59.8 mm. The heater resistance is 223 Ohm (217 Ohm) and thermoresistor resistance is 49 Ohm (47 Ohm). In round brackets the heating element parameters I've measured fo my YIHUA 908D soldering iron presented. So these are identical heating elements but price is overestimated.

Bought this heating element as spare one for YIHUA 908D soldering iron. There is no any information about this heater on the banggood.com site as well as in the package. Here I present results of my measurements. The ceramic rod sizes: outer diameter is 3.76 mm and full length without wires is 59.8 mm. The heater resistance is 223 Ohm (217 Ohm) and thermoresistor resistance is 49 Ohm (47 Ohm). In round brackets the heating element parameters I've measured fo my YIHUA 908D soldering iron presented. So these are identical heating elements but price is overestimated.

Bought this heating element as spare one for YIHUA 908D soldering iron. There is no any information about this heater on the banggood.com site as well as in the package. Here I present results of my measurements. The ceramic rod sizes: outer diameter is 3.76 mm and full length without wires is 59.8 mm. The heater resistance is 223 Ohm (217 Ohm) and thermoresistor resistance is 49 Ohm (47 Ohm). In round brackets the heating element parameters I've measured fo my YIHUA 908D soldering iron presented. So these are identical heating elements but price is overestimated.

Товар соответствует описанию. Качество отличное. Сопротивление около 50Ом

Товар соответствует описанию. Качество отличное. Сопротивление около 50Ом

Товар соответствует описанию. Качество отличное. Сопротивление около 50Ом

Got this as a spare part for my YIHUA 908D 220V 60W LED Digital Display Soldering Station. Works very well.

Got this as a spare part for my YIHUA 908D 220V 60W LED Digital Display Soldering Station. Works very well.

Got this as a spare part for my YIHUA 908D 220V 60W LED Digital Display Soldering Station. Works very well.

Yihua

Yihua

Yihua

Very good .. As I expected the right choice .. Thanks

Very good .. As I expected the right choice .. Thanks

Very good .. As I expected the right choice .. Thanks

Das war gut

Das war gut

Das war gut

Quando o montei, parti-o!!! Então tive que pedir outro.........

Nel montarla l'ho rotta !!! Cosi' ne ho dovuto ordinare un'altra.......

Quando o montei, parti-o!!! Então tive que pedir outro.........

Didn't suit my 862D. Heater element measured 196 ohms and took 20 minutes to reach just 145 C. Used another I had which had a heater element that measured 3 ohms and that was fine.

Didn't suit my 862D. Heater element measured 196 ohms and took 20 minutes to reach just 145 C. Used another I had which had a heater element that measured 3 ohms and that was fine.

Didn't suit my 862D. Heater element measured 196 ohms and took 20 minutes to reach just 145 C. Used another I had which had a heater element that measured 3 ohms and that was fine.

the heating element is too much resistant. I mesured 210 ohms, for the station Yihua 939d, the heating element is a 4 ohms resistor.

the heating element is too much resistant. I mesured 210 ohms, for the station Yihua 939d, the heating element is a 4 ohms resistor.

the heating element is too much resistant. I mesured 210 ohms, for the station Yihua 939d, the heating element is a 4 ohms resistor.

ок хороший товар

ок хороший товар

ок хороший товар