Todas as mensagens

paultaylor1169 I am sure they will be working on an imperial version...I'll be sure to ask them when we meet. 😉

2023-02-01 12:47:37 Útil (0)
Enviar
respostas (2)

Q: Does it fit a Dewalt DWE 7492 Fence?

perguntado por BG115321644 sobre 2021-03-21 03:21:55

paultaylor1169 Hi, If the fence is the same or similar to the DW745, then I would say yes... See my review for more detail

2021-03-21 03:25:04 Útil (3)
Enviar
respostas (1)

Q: Do the wheels run at an angle to keep the workpiece against the fence?

perguntado por BG521014022 sobre 2020-11-30 09:54:17

paultaylor1169 Yes a 5 degree angle... also one way to prevent kickback

2020-12-14 02:07:46 Útil (4)
Enviar
respostas (1)

Q: Will this mount to a Dewalt 745 ?

perguntado por email sobre 2020-11-11 02:44:39

paultaylor1169 I have a Dewalt DW745 table saw and was pretty sure that with a bit of a modification I could get it to fit my fence. A piece of 3 by 2 epoxied to the inside face of the fence and I was ready to fit it, I had to shorten one of the aluminium T Track pieces by about 150mm before screwing it to the fence, ensuring they cleared the fence face. These are a few pics of the finished installation… To be fair it works but I have not used it with large pieces of ply but I expect it to assist keeping the timber tight up against the fence.

2020-12-14 10:07:13 Útil (8)
Enviar
respostas (1)