Graeme
Q: Do I need to buy a reciever aswell? What would rx be suitable, I have Jumper TX.
perguntado por Graeme sobre 2020-12-18 07:09:33
Graeme it is designed to replace a lighter socket. it does not fit in one.
2021-07-16 03:02:58 Útil (1)
Graeme Racerstar BR3536 1200KV with 40A ESC 10x5, 10x6 prop 3S 2200mAh battery the 10x5 prop will be fine and do any aero's you want but the 10x6 will give extra speed. the setup above will balence the model nicely on the CG
2021-05-29 01:58:44 Útil (0)Q: does this model come with building plans
perguntado por rcbrian sobre 2020-06-19 09:26:02
Graeme mine included a plan for the wings but not the fusalage.
2021-05-29 01:53:47 Útil (0)Q: where is the CG on this airplane?
perguntado por Toeny sobre 2021-02-26 08:05:18
Graeme I fly mine with the CG at 115mm (4.5 inches) back from the leading edge. Flies really well with this. This happens to be if you balance it up side down and put your fingers immediately behind, (but not pushing on) the wing retaining lugs.
2021-05-29 01:52:39 Útil (0)Q: Can I connect it directly to USB and use is as a Zoom camera?
perguntado por BG154853943 sobre 2020-06-20 11:35:18
Graeme Yes but you will need a separate micrphone
2021-05-14 06:51:26 Útil (1)Q: what would be a good motor tonuse on this model?? thanks
perguntado por cristianoepm sobre 2021-01-18 10:26:43
Graeme Racerstar BR3536 1200KV 2-4S with 40A ESC 11x5 or 10x6 prop 3S 2200mAh battery
2021-05-10 06:52:36 Útil (0)Q: Can I change a little the output voltage, i.e. up to 28V?
perguntado por iw4blg sobre 2018-11-09 04:09:59
Graeme Be aware that if the voltage is adjusted far from the supplies design voltage that its efficiency will be reduced and you would risk damage to still use it for 400w or 16A. The voltage adjustment is ment to trim the voltage so you can get an accurate 24.0v despite other manufacturing tolerances. It is not intended to give you a variable supply.
2021-04-27 02:40:40 Útil (0)Q: Are the wings removable for transport?
perguntado por Graeme sobre 2020-10-30 08:52:27
BG185351713 yep...unscrew the two screws, that's all 👍
2020-10-31 04:53:55 Útil (2)Q: is this a 2 part glue? how is it applied?
perguntado por Graeme sobre 2020-01-15 12:53:49
Lolboat 2 size glue.
2020-02-14 04:00:52 Útil (1)Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!
Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.
Ajude os outros e seja mais feliz!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
Alexander_Wolf You need to buy a receiver and solder it to the board. This comes with a nice pinout diagram that shows where to hook up your receiver. They support either Frsky R-XSR, Spektrum Receiver or TBS Receiver and a Beitian BN-880 GPS module. You have to look up on your radio, which of those protocols it supports or if you want to buy an add-on module for your radio and buy the corresponding receiver module that you want to install on your drone.
2022-02-03 02:15:29 Útil (0)