Todas as mensagens

mrphyslaw substantial price increase because now it has holes for mounting TBS products personally I think Kabob could better help those in need of said holes just throwing that out wink wink

2020-09-10 03:33:46 Útil (0)
Enviar
respostas (1)

mrphyslaw an extra battery can be from 9 to 14$ us. The 969 comes in green or orange. 20$US for a new ori6 set of wheels and tires.

2020-05-22 02:15:50 Útil (0)
Enviar
respostas (1)

Q: can i use this with an Eachine EO10S pro? thanks

perguntado por BG221163912 sobre 2020-04-17 05:06:57

mrphyslaw not without a multiprotocol module

2020-04-28 02:22:57 Útil (0)
Enviar
respostas (1)

Q: does it work with the a959b 1/18?

perguntado por isaiahscott904 sobre 2020-04-27 11:38:18

mrphyslaw no you have to replace esc and servo

2020-04-28 01:18:03 Útil (0)
Enviar
respostas (3)

Q: why now Tyro132 at 14% off lmao

perguntado por mrphyslaw sobre 2020-04-08 12:30:09

Pachy glossal The shipping fare is higher because of COVID-19

2020-04-20 05:03:08 Útil (0)
Enviar
respostas (1)

Q: fly time 19000. ?! fly time 25000 ?! please

perguntado por CLosHill sobre 2019-12-18 10:18:44

mrphyslaw don't forget 48khz jesc:)

2020-04-07 11:43:17 Útil (0)
Enviar
respostas (2)

mrphyslaw flashing esc firmware to jess 48khz and emuflight with mocking bird tune helps a lot cruising lightly with 19k and the original 300mah batt gets me about 4 and half min

2020-04-07 11:41:32 Útil (1)
Enviar
respostas (2)

Q: What does the switch on the charger do?

perguntado por BG408071164 sobre 2020-01-21 09:57:56

mrphyslaw fyi flick switch towards battery connections for 4.2 and towards usb side for 4.35

2020-04-07 11:36:40 Útil (0)
Enviar
respostas (2)

Q: The 1900kv or the 2500kv for an FPV newbie? 🤔

perguntado por jjhall sobre 2020-02-06 05:22:44

mrphyslaw 1900kv is plenty 2500kv eat batteries way faster even with 48khz and emuflight.

2020-04-07 11:33:09 Útil (1)
Enviar
respostas (2)

Q: Hello. Can I connect this module to the Flysky FS-i6X transmitter? Will it work?

perguntado por Alexander Tyurin sobre 2019-05-31 08:13:28

mrphyslaw not really without heavy modification the fs-i6x doesn't have a Jr bay. There are 3d printer stls online to help and you would have to do some wiring and soldering along with a step down transformer. Even then you wouldn't be able to use the serial function without open tx just the ppm

2020-04-07 11:08:22 Útil (0)
Enviar
respostas (1)

Q: would these work on the eachine trashcan?

perguntado por FPVShadow sobre 2020-04-07 11:52:03

mrphyslaw these have a .8mm hole and are 40mm you need 1mm and 40mm

2020-04-07 11:02:20 Útil (0)
Enviar
respostas (5)

mrphyslaw Actually in order to charge 1s on this type of board with the b6 mini or any other 4 button charger you don't connect the parallel cable at all. You have to modify one of the 3 included adapter cables to connect or jumper any one of the PH2.0(1s) plugs to any one of the xt-30 plugs in center and only connect main power cables. Then In system settings go to Bal. Connection set to 0FF. Now you can charge, fast charge, discharge or storage charge 1s like normal using board. Only five at a time. Do not forget to disconnect jumper and turn bal connection back ON before charging 2 or 3s.

2020-03-13 01:48:06 Útil (0)
Enviar
respostas (1)

Q: Magic sticky tape is velcro?

perguntado por lordango sobre 2020-03-12 09:14:53

mrphyslaw Yes it is almost identical if not better than original pre-cut velcro mounting tape. I also reused existing and will keep for spare.

2020-03-13 01:08:49 Útil (0)
Enviar
respostas (2)

Q: are the shocks on this oil filled?

perguntado por fost318 sobre 2019-06-04 04:21:14

mrphyslaw No the shocks are not oil filled. They just have a screw shaft with no seal they cant be filled like for example wltoys 9x9 series. The length of the shocks are about 67 to 68mm hole to hole center. 70mm shocks would be the easiest to find replacement.

2019-06-27 04:03:32 Útil (0)
Enviar
respostas (3)