QJH1S0
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

QJH1S0 09/02/2020
I'v bought these motors to replace my worn out Racerstar 2205-s. Immediately, I had a problem with them not spinning properly, until I loosened the shaft bolt (very safe, I know...). The first couple of flights were ok, and the motors were smooth, and sounded much better then my old Racerstar motors. BUT, and this is where the end starts. Today, after a bit of smooth flying, one of the motors started to sound really really bad. After cursing a bit, and took the motor apart. There was nothing inside, clearly the bearings went bad. I'm sorry, but these motors need to go, I'm buying some Emax ECO ones instead (which I already use for my 6S build).
Emax RS2205S 2205 2300KV 2600KV Motor Brushless de Edição Racing para Drone RC FPV Racing 3-4S
US$24.14 US$25.99
0
Recomendações
Comentários (0)
Diatone GTR369S TX400 GTR369 SX 3 "6S Crazy Racing Limited Edition PNP 143 mm FPV Racing RC Drone
US$218.39 US$262.07

Q: Will this work with a flysky receiver?

perguntado por QJH1S0 sobre 2019-10-23 08:31:49

jona100jona22 Yes it will work with any receiver

2020-01-11 02:49:43 Útil (0)
Enviar
respostas (1)

QJH1S0@Baranyi Tamás Végülneked megérkezett? Eu priority linnal rendeltem (05.25), és nekem se mozdul egy ideje. Dani

Zsombor Papp 09/04/2019
Fast hipped in 2 weeks! Flight smoothly, fast responding for the emails.
FIMI X8 SE 5 KM FPV Com 3 Eixos Gimbal 4 K Câmera GPS 33mins Tempo de Vôo RC Zangão Quadricóptero RTF
US$573.85 US$599.00
38
Comentários (5)
QJH1S0 29/01/2019
Bought it for my Mobula 7 along the upgraded V2 frame. Currently testing V2, but this'll come in handy some day. Looks identical to the one which came from factory.
Bwhoop75 75mm Brushless Minúsculo Kit Whoop Frame para Happymodel Mobula7 FPV RC Zangão
US$4.91 US$6.36
0
Recomendações
Comentários (0)
QJH1S0 29/01/2019
I've ordered this as a replacement for my Mobula 7 original frame, which broke after first flight. This frame is plug and play perfect replacement, looks a bit more flexible than original. We'll see how well it holds up.
Happymodel Mobula7 Peça de Upgrade M7FRAME V2 Kit de Estrutura de 75mm Brushless Tiny Whoop para Drone RC Corrida FPV
US$9.19 US$9.99
0
Recomendações
Comentários (0)
QJH1S0 28/02/2019
I've bought this selfie stick, with vlogging in mind. It arrived well packaged, in one piece. My phone fits nicely in the holder, no risk of falling out. It's also compatible with my SJCam holder attachment so thats a plus. Didn't try the remote out yet, but I don't see why it shouldn't work. The tripod arms are a tad bit loose, but work as they should, also when used in selfie mode, you're holding it with your hand together anyway. All in all, I think its a good investment, if you're thinking of staring a vlog, and even if you change your mind, you'll still have a cool selfie stick to use.
Selfie extensível Bakeey Varanda Tripé bluetooth sem fio remoto Obturador para celular
US$14.73 US$21.19
0
Recomendações
Comentários (0)
QJH1S0 14/02/2019
I bought this after a couple of bad FC/4in1ESC combos. The install was simple, using the mounts that came with it. The black xt60 is a nice addition, making it distict, and a bit cooler in my opinion. The FC was recognized instantly by PC, the setup was quick (setting Ibus, and flight modes) The ESC was also recognized by BLheli, the motor directions were set, and immediately out to fly. Finally my drone does what I tell it to, when and how I tell it to, and nothing else. I'll probably have to do some PID tuning, but thats normal. Only con is that there's no built in VTX, but its just a small inconvenience. All in all, awesome product especially for the price, highly advised for a tight build.
Controlador de Voo MAMBASYS F405 MK2 Betaflight F40 40A 3-6S DSHOT600 ESC Brushless FPV Racing 30.5x30.5mm
US$96.99 US$119.00
0
Recomendações
Comentários (1)
QJH1S0 10/02/2019
A perfect cable, for a great portable soldering iron, I would recommend both for a day out flying. You can never know, when you might need them
MINI XT60 Conector de Bala Macho para Macho Cabo de Alimentação CC CC5525 para TS100 Ferro Eletrônico de Solda
US$13.99 US$16.99
0
Recomendações
Comentários (0)
Bardwell F4 AIO Controlador de Vôo V2 w / Porta JST & Onboard Memória OSD 3-6 S 30.5x30.5mm para RC Drone
US$37.85 US$44.57

Q: Can this flight controller work with Eachine Stack X 4 in 1 ESC? The 8 pin connector pinout looks like its the same as Eachine Stack X FC.

perguntado por QJH1S0 sobre 2019-01-08 08:38:08

juan_adrian_rc Yeah it most probably work but maybe you'll need to rearrange some pins in the cable

2019-02-13 08:52:32 Útil (0)
Enviar
respostas (1)

QJH1S0 Hi, did you get it to bind? Also having binding problems with Flysky FS-i6 :(

DroneFart 01/01/2019
Having problems binding it so we will see.
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w / Upgrade BB2 ESC 700TVL BNF
US$121.93 US$105.56
0
Comentários (2)
QJH1S0 04/05/2018
I've ordered this board before everything went fine till I soldered the xt60 to it. Probably fried the board somehow. For the second one I was really carefull. The PC recognized it immediately the setup was easy. Didnt fly it yet just a small lift off but I'm confident that it'll fly just fine. Anyhow I'll fond out thia afternoon.
Matek Sistemas BetaFlight F405-CTR Controle de Vôo Embutido PDB OSD 5V / 2A BEC Sensor de Corrente para RC Drone
US$45.99 US$55.99
0
Recomendações
Comentários (0)
Placa superior de reposição para Eachine Wizard X220S FPV Racer RC Drone Peça superior da placa 1.5mm de fibra de carbono
US$18.47 US$19.99

Q: Hi. I have a lisam 210 frame, but the top plate seem to broke. Does this fit that?

perguntado por QJH1S0 sobre 2018-04-02 10:33:20

robertolopezesp No e recivido el pidido

2018-09-15 01:46:15 Útil (0)
Enviar
respostas (2)
QJH1S0 20/02/2018
Ordered two of these for my first ever self built racing drone. They are working great getting about 5-10 minutes of flight of each battery. Had a couple of bumps, crashes with the drone, but they are still in great shape (in comparison the battery I ordered from Hobbyking lost its balance connector on first flight, no crash). Already have four of these, and two more are currently shipped. I can only recommend them, for a budget build, great size, weight, and power.
2 PCS Bateria Lipo ZOP Power 14.8V 1800mAh 65C 4S com plug XT60
US$45.99 US$55.99
0
Recomendações
Comentários (0)
Módulo de câmera para Raspberry Pi 4 Model B / 3 Model B / 2B / B+ / A+
US$13.79 US$21.99

Q: I got the same camera, and tried to connect it to my pi 3 B, to use with Octopi. Unfortunately, Octopi doesnt want to show the camera picture in the control tab. Could you please help me, to find out if I got a bad camera, or I'm doing something wrong in the setup? Thanks in advance.

perguntado por QJH1S0 sobre 2018-01-17 11:51:24

QJH1S0 Turns out I plugged the camera in the display port, thats why it didnt work. Plugged it in the camera port, now working perfectly. Thanks

2018-01-31 03:33:03 Útil (5)
Enviar
respostas (2)
QJH1S0 23/01/2018
I bought these for my Cr-10 printer to make it quieter. As soon as I installed them I could feel something was different about the motor movements. Loaded up a test gcode which before bought out the annoying noise now silent as a wisper. Finally I can sleep while my printer is printing overnight and not wake up because of the noise. The prints were already awesome so that didnt improve but that wasnt the point of buying them. Highly recommended!!!!
Módulo adicional TL-Smoother com linha Dupont para motor de passo de impressora 3D
US$10.38 US$10.99
1
Recomendações
Comentários (0)
QJH1S0 22/01/2018
Bought these for my first racing drone build. Only had a little bit of flight with them, but they're great. The green ones look great on my build, and make my drone really easy to spot in the sky. Will buy more when needed
10 pares Kingkong 5x4.5x3 5045 5 Polegadas 3-lâminas Hélice CW CCW para FPV Racer
US$10.38 US$10.99
0
Recomendações
Comentários (0)

QJH1S0 Look, if both boards have the same issue, then maybe you're doing something wrong. First, check if you have the driver for the pc to recognize the board. Then if nothings working flash the newest betaflight firmware on it, also look into boot mode. Had the same problem, tried many things, but in the end its working flawlessly now. So hold on, you'll get it working eventually.

Congcon 24/12/2017
This board does not hook up wth CleanFlight PNP. U hv to feed it a special driver or whtever to it to work. Ths is my 2nd purchase of ths FC same issues :$ Sme times it does not hook up wth CF then unhook USB & hook bck again ...... don't knw why! ! Why Dominq or BG whoever not fixing it ??? I set up my 1st board after lot driver issues :$ ..( I m not sofware guy) it has been flying well & stable. It gives nice smooth flight. I gave it 4 out of 5 stars bcoz of th driver issues.
Controlador de Voo F3 Acro 6 DOF/Deluxe 10 DOF Para Multirotor Racing
US$22.99 US$23.99
2
Comentários (1)
Módulo de câmera para Raspberry Pi 4 Model B / 3 Model B / 2B / B+ / A+
US$13.79 US$21.99

Q: I got the same camera, and tried to connect it to my pi 3 B, to use with Octopi. Unfortunately, Octopi doesnt want to show the camera picture in the control tab. Could you please help me, to find out if I got a bad camera, or I'm doing something wrong in the setup? Thanks in advance.

perguntado por QJH1S0 sobre 2018-01-17 11:51:24

QJH1S0 Turns out I plugged the camera in the display port, thats why it didnt work. Plugged it in the camera port, now working perfectly. Thanks

2018-01-31 03:33:03 Útil (5)
Enviar
respostas (2)

QJH1S0 Hi, I got the same camera, and tried to connect it to my pi 3 B, to use with Octopi. Unfortunately, Octopi doesnt want to show the camera picture in the control tab. Could you please help me, to find out if I got a bad camera, or I'm doing something wrong? Thanks in advance. Daniel

Schiksie 30/01/2017
Great camera set up on my 3D printer. Also created a mount for it : http://www.thingiverse.com/thing:2072992
Módulo de câmera para Raspberry Pi 4 Model B / 3 Model B / 2B / B+ / A+
US$13.79 US$21.99
6
Comentários (3)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe