Principal crítica positiva para Módulo de alimentação em Banggood Portugal|Fazer compras Portugal

21% OFF Módulo de Fonte de Alimentação Regulada Ajustável DC 0-30V 2mA - 3A Kit de Montagem US$7.59 US$9.59 View It

Geral:

PaulS 05/06/2015

As noted above, the values of the components are shown on the PC board. This means once a component is installed, you can no longer see the value it is supposed to be. I assembled mine in about two hours, observed the polarity of the components and connected it to a 24Vac supply. Nothing happened. The LED did not light, and the output measures only 0.63 vdc. As these is no paper documentation, I have no idea of how to trouble-shoot this item. The only items one can disconnect are the pots and to check the voltage at the fan connector. Pots are correct and the fan output is correct. None of the rectifiers are warm, and the LED does not light. Does anyone have any good ideas? Any help will be appreciated. As noted by others, a 115/24v 3A transformer required to power this item is rather expensive - Beware!! As of this writing, this project is not good. Can NOT recommend it!!

Comentários (9)

Enviar

Banggood Dear customer,Can you send videos to us? so that we can solve your problem.Best regards
22/05/2024

Enviar
cassiopeia i have the same Problem. u2 very hot, Output 0.34V
Resposta 09/06/2015

Enviar
cassiopeia it works, Q1 was defective
Resposta 11/06/2015

Enviar
ppotocnj Mine work perfectly it take me 20 minutes to assembly. Wery nice product.
Resposta 15/06/2015

Enviar
tonyjobson I have the same problem. IC near the trim pot gets very hot. only arround 0.5 volts on the output.does not work.
Resposta 03/10/2015

Enviar
banggood @tonyjobson Hi ,
Sorry to hear that.
Would you please contact our customer service cservice@banggood.com?
Please send us your order number and a video or some pictures to show your problem.
Resposta 05/10/2015

Enviar
ricardomagagnin Same problem, when I removed the Q1 the output goes to 15V. I really do not know how to solve it.
Resposta 29/10/2016

Enviar
Halmar I got 0.4VDC on output when I hooked mine up for testing the first time on a DC source. You have to use an AC transformer because there is a charge pump circuit to generate negative voltage for the Op-Amps.
Resposta 06/01/2017

Enviar
banggood @ZenElektronika Dear customer,
Thank you for choosing Banggood and sorry for your any inconvenience came up with the product.
If you need any support, you can contact us via this link:http://www.banggood.com/Contact-Us_hi111, and we will give you a good solution.
Best regards :)
Banggood team
Resposta 09/08/2018

Enviar

Ver mais

Nossa Empresa	Entre em contato conosco	Pagamento & Envio	Programas de Parceria
Sobre a Banggood.com garantias e política de devolução Termos de uso Política de Privacidade Reivindicação de Propriedade Intelectual Mapa do site	Entre em contato conosco Guia do Usuário Novo Central de ajuda Assuntos Especializados	Métodos de pagamento Guia de Transporte Locais para onde enviamos Tempo estimado de entrega Instrução de BGpay	Programa de Fashion Blogger Programa de Afiliados Programa de Atacado Entrega direta clube de revisão

Nossa Empresa

Entre em contato conosco

Pagamento & Envio

Programas de Parceria

Sobre a Banggood.com garantias e política de devolução Termos de uso Política de Privacidade Reivindicação de Propriedade Intelectual Mapa do site

Entre em contato conosco Guia do Usuário Novo Central de ajuda Assuntos Especializados

Métodos de pagamento Guia de Transporte Locais para onde enviamos Tempo estimado de entrega Instrução de BGpay

Programa de Fashion Blogger Programa de Afiliados Programa de Atacado Entrega direta clube de revisão