Uma parte da revisão foi traduzida automaticamente.
Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.
Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!
Products delivered to you Really wonderful
replacement worked fine . Dont use 2 cell lipo. It makes the smoke come out.
Ok, this is the third CDI I’ve bought including the one that came with the blue “Hit & Miss” engine I bought last year. Hopefully this is the one that doesn’t burn up and stop working after a couple minutes of runtime. I won’t be buying another one after this, considering I’m into this engine for over $300.00 now.
I use this ignition for my own built engines.
Ware erhalten Alles bestens OK
Queridos vendedores O carregamento acabou de chegar até mim, infelizmente o sensor da sala está desaparecido, uma operação do sistema está, portanto Não é possível. Envie esta parte depois de mim. Atenciosamente seu E.Rau
Eu uso estes na minha casa construir motores modelo, eles são muito bons, eles funcionam bem em 6 volts e nada menos. Basta ligar um sensor de efeito hall através de um chumbo de extensão servo e seu up e funcionando.
transporte rápido, bens super, muito ruim que o transmissor Hall não está lá