Machifit 25GA370 DC 12V Motor de Redução Micro com Codificador e Redutor de Velocidade
Uma parte da revisão foi traduzida automaticamente.
demoruo um seculo veio queimado nao funciona a embalagem apenas um saquinho muito vagabunda incrivel tamanho descaso por um equipamento eletronico. nao compro mais uma merda esse site pessimo
Got the 12 rpm version. Strong little motor(can nearly hide it behind my thumb), with a large pulley on the shaft so I can hang onto it I can't hang onto the motor solidly enough to stop it. Nice quiet motor. Very little gear noise or motor noise. Haven't used the encoder yet. Do wish what it was encoding was better explained. If it is the motor shaft then it should be capable of fairly high precision because of the huge gear reduction. If it is the gear then the precision will be far lower. Don't know which? Minorly concerned about how exposed the encoders circuity is but so far no problem. Wish it either came with the plug and a short pigtail so I had the other half of the plug in or had a link to it so I can order it as a separate item. 6 connections are solidly labelled which is good. All in all if it proves durable I am content with it.
Ambas as unidades foram recebidas com êxito
Chegou e trabalhou como esperado. Sobressalentes em mão, na maioria.
Bom produto, mas atrasado
Está bem, está bem
works fine, but the parameter's table seems wrong! I bought the 35RPM model, and the GEAR RATIO is something about [172:1] [1892PPR]