Opiniões dos clientes

4.58 de 5
Escrever uma crítica
  • Todos Comentários (26)
  • Imagem (1)
  • Vídeo (1)
  • Todas as estrelas
    • Todas as estrelas(26)
    • Estrela(19)
    • Estrela(4)
    • Estrela(2)
    • Estrela(1)
    • Estrela(0)
Ordenar por:
Comentários Anteriores
  • Comentários Anteriores
  • Mais úteis
  • Mais Recente
  • 2017-11-12 07:22:28

    Perfect board with many features. Original software has no LED-Strap function. Please install the latest software first.

  • 2020-09-18 08:43:29

    genau so wie bestellt. alles top

  • WaZZa_
    2019-11-07 20:09:21

    works good

  • 2017-08-24 07:15:30

    Fastest CPU, Software has nowhere near even caught up to this FC yet. Currently the 32kHz Gyro is useless. You have to use a CLI command to even enable it and when you do if you use anything over 32kHz/8kHz the CPU is loaded to 100%. This is problem..... this CPU can easily do 32kHz/32kHz however the software just is not there yet in terms of coding. This time next year and F7 will be all the rage for real. Right now the only way to run faster than 8kHz/8kHz is with an F4. If my memory serves

  • 2017-08-20 01:04:26

    This F7 board only has 3 UARTS labeled (1, 3, and 6), but Betaflight 3.2 RC3 shows UART 2 as an option, so that may be labeled as something different. Current Betaflight software does not support the 32khz gyro, but with some time to catch up I'm sure it eventually will. Right now the only supported version of Betaflight is the 3.2 Release Candidate, so there's no option for a tested and stable software version. Overall it's a good board, the current sensing and OSD work perfectly. The plug to connect

  • Rostom
    2017-08-07 10:33:55

    This board is working well in my 130 jalapura frame build. The quality seems good. I have updated it to Betaflight 3.2.0 RC3 and working fine. I have a spektrum serial telemetry receiver and it works on the various UART RX pads in spektrum 2048 mode. But I have not been able to get it to work in bidirectional serial mode with telemetry on any of the uart Tx pads. Is this is a betaflight firmware issue for the new F7 chips or if it is the board.? No Instructions to switch between gyros

  • Bill
    2018-09-05 17:04:15

    I was expecting this to have the same pins as an F4 for some reason but they are differnt. Not sure what that means in terms of figuring out the wiring as there is minimal documentation at this stage. Plugged in flashed with iNav for an Omnibus F7 as at the time of writing there is not an F7 Pro target. Seems to work as expected in the iNav gui.

  • Lerac4
    2018-08-20 06:34:50

    bueno el caso esque no va ni por ppm.solo va por ibus.y parece ser que esta mal.porlomenos esta que me llego.he provado todos los firmware para ella porque el 3.2.0 al parecer ya dava error y ningun firmware hasta la fecha soluciona el problema.ya me puse en contacto con bosotros,aver si me dais una solucion para enviarla.gracias.

  • pgric
    2017-08-25 07:06:44

    I'm using this board for the GEPRC GEP LX Leopard. I've choosen this becasue I wanted an integrated OSD and a barometer. However, the setup was a pain. First issue was to get the latest firmware flashed because with the stock one the board is quite useless (no OSD, no gyros,...) But flashing didn't work - I had to find, install and understand the Zadig tool first in order to be able to flash this board. The second issue was to connect the receiver - there was no power. Only after I find out that there

    Comentários (1)
  • 2018-01-27 18:52:12

    Consegui fazer funcionar quase tudo, gps barometro, compasso. sá não consigo de forma alguma fazer funcionar meu receptor Ezuhf em ppm. Já perdi dias pesquisando, simplesmente não consigo. se alguem puder me ajudar eu agradeço

    Comentários (1)

    Go to page


    Você pode estar interessado em

    recommendation for you
    • US$44.13
    • US$41.99
    • US$17.99
    • US$11.99
    • US$20.99
    • US$29.05
    • US$62.89
    • US$58.43
    • US$29.99
    • US$10.29
    • US$30.99
    • US$59.99
    • US$14.99
    • US$229.99
    • US$59.55
    • US$54.99
    • US$12.99
    • US$4.71