05 1.2 controlador de vôo versão F4 Betaflight raceflight 6dofF4stm32
Uma parte da revisão foi traduzida automaticamente.
Well see how does it perform. Revo firmware loaded.
zum Flashen habe ich die Revo Hex genommen funktioniert . das einzige was wirklich fehlt ist ein Buzzer Anschluss und Lipo Spannung. sonst guter Gyro 6000
this F405 board can run 8K / 8K at only 5-7% !!!! that's insane! this has been running flawlessly on my 5" quad for 2 months now & I couldn't be happier.
Value is somewhat compromised since you now can get F4 clone boards on this site with vbat, buzzer, and OSD for about the same money. Anyways my board came flashed with betaflight 3.0. I tried to flash to 3.0.1 without much success. In the end on the flash tab of betaflight you have to leave all your options off like full chip erase, reboot, etc for it to work. Also when you hit save and reboot in betaflight the serial port disconnects. Very annoying but the betaflight devs are aware of the issue.
F4 flight controller. good quality, but without vbat and buzzer. please bye the new version with vbat and buzzer support.
mein 1. F4 FC und ich bin begeistert. alles "stock" und das Ding fliegt wie auf Schienen :-) einfach super!!!
Package included board, one SIL and two TIL (triple in line) headers - one normal and one right angle header. Not tested as i only started to construct the copter. But board seems to be working by connecting to PC via USB.
Really Great Flight Controller, works perfectly with Betaflight und Raceflight with the CC3D revo firmware.
Raceflight geflasht, dank Anleitung sehr schnell Möglich. Man sieht noch den Hyperlite Aufkleber auf der Rückseite ;-)
Simple board my first F4 lack of buzzer and vbat isn't much of an issue if you use a battery alarm and set u=your esc's to beep after 2 mins if you loose the quad in long grass :)