LEGOManiac
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

LEGOManiac 26/01/2018
I bought two. They function as advertised but don't have any safety certification marks. They are contained in a very lightweight plastic housing, so lightweight that I wondered if they were applying 120V directly to the two wires exposed at the surface (which would have been a shock hazard), so I opened on up. They have a transformer that isolates it from the mains supply and a small power supply that provides 22.4V to the wires exposed at the top. As is visible in the advertiser's photos, there is no cover for the LEDs or the exposed wire. I have not tested it to see how much current can be drawn from the wires if touched with wet hands, so I can't be certain how much of a shock hazard there is, but I have to say it bothers me. It will be interesting to see, in early spring, how this compares to the florescent tubes I've been using to start plants with up to now.
20W E27 166 Vermelho 34 Azul LED Crescer Luz Planta Lâmpada Lâmpada Estufa Jardim Planta Semear Luz
US$15.02 US$14.00
2
Recomendações
Comentários (0)
DIGOO DG-ZXC40 320° PTZ 5MP 1080P 8 LED WIFI Speed Dome Câmera IP IR Full-color Night Vision ONVIF Protocol TF Card & Cloud Storage Monitor de segurança ao ar livre CCTV
US$66.99 US$61.99

Q: Does the camera have a web interface or are we being forced to use a phone? Can it be accessed from PC based security camera software?

perguntado por LEGOManiac sobre 2019-10-30 07:09:50

Moynana Have a web interface, please refer to the manual for the specific address.

2019-10-30 08:40:20 Útil (1)
Enviar
respostas (1)
DIGOO DG-ZXC40 320° PTZ 5MP 1080P 8 LED WIFI Speed Dome Câmera IP IR Full-color Night Vision ONVIF Protocol TF Card & Cloud Storage Monitor de segurança ao ar livre CCTV
US$66.99 US$61.99

Q: Does the camera support sending images/video to a LOCAL server?

perguntado por LEGOManiac sobre 2019-10-30 07:10:40

Moynana no

2019-10-30 08:38:33 Útil (0)
Enviar
respostas (1)
LEGOManiac 14/09/2018
I bought this for an AquaCraft Reef Racer 2 for which hobby shops want a jaw-dropping $80 a pair for the propellers. At this price, I figured it was worth a try to buy one and check the fit. It's perfect. I'm ordering 5 more (I have 2 boats). The package includes a replacement nut, but not a washer.
FT012 barco de corrida rc peças de reposição parafuso hélice
US$6.89 US$7.99
0
Recomendações
Comentários (0)
LEGOManiac 14/09/2018
I'm not using it for a boat, so I can't comment on whether it's good for that application, but it suits my needs nicely. I suppose if you are using it inside a boat, you don't care what colour it is, but in my application, the hoses are visible but I'm OK with the fact that it's actually blue, and not clear as shown in the photo. I did take off one star for the photo and description not matching the actual colour. There are, after all, some people for whom this might be an issue.
Barco TFL Small Bolt E13 RC 800mm Tubo de Água Resfriado com Silicone
US$8.08 US$11.99
0
Recomendações
Comentários (0)
LEGOManiac 14/09/2018
Hobby shops want a ridiculous $80 for a pair of propellers for an AquaCraft Reef Racer 2, so I bought a number of propellers on Bangood to see what would fit. This one does not fit, but with an all-metal shank it's probably the most durable. I give them full marks for construction quality.
Peças de reposição para barco de controle remoto Feilun FT007. Hélice de cauda FT007-08
US$6.89 US$7.99
0
Recomendações
Comentários (0)
LEGOManiac 14/09/2018
I bought this for an AquaCraft Reef Racer 2 boat. It's a tight fit bit it will probably work. Hobby shops want a jaw-dropping $80 for a pair of original AquaCraft propellers, so I bought several different propellers to see which ones would fit. This one came very close and can be filed to fit or just forced on, but if you have an AquaCraft Reef Racer 2, there is a better propeller model at roughly the same price: https://www.banggood.com/FT012-RC-Racing-Boat-Spare-Parts-Screw-Propeller-p-974302.html Also, be aware that, unlike other propeller models I tried, this one does not come with a nut.
Hélice WLtoys WL915-14 Peça do barco RC WL915
US$6.92 US$7.99
0
Recomendações
Comentários (0)
LEGOManiac 17/03/2018
This is a good set of generic sensors. You can get this kit from a number of vendors. This particular set is good if you are adding to your already existing sensor collection, but if this is intended as your first set of sensors, I'd recommend spending a bit more and getting a kit that comes in a divided case with a printed sheet telling you what each sensor module does. Some of them are not at all obvious and the individual circuit boards usually don't have labels that you use to look up the function. That's what I did: bought another kit with a case and label sheet and used this kit to top it up.
Geekcreit 37 Em 1 Conjunto De Placas De Módulos De Sensor Kits De Iniciação SENSOR KIT Para Arduino, Pacote De Sacola Plástica
US$17.24 US$16.99
0
Recomendações
Comentários (0)
10 peças 100x68x50mm plástico eletrônico Caixa junção elétrica à prova d'água Caso
US$35.79 US$37.99

Q: Will an Arduino Uno fit inside?

perguntado por LEGOManiac sobre 2018-03-02 07:35:36

Djninjac I don't know, but why you want to use it with the Uno ? I mean the Uno board has the dedicated housing.

2018-03-16 04:31:16 Útil (0)
Enviar
respostas (1)
LEGOManiac 01/03/2018
I've been waiting for a long time now for someone to come up with a larger text display. The old 16 x 2 displays are inevitably a bit cramped. The great thing is, all I had to do with my existing programs was initialize the LCD as: LiquidCrystal_I2C LCD(0x3F, 20, 4); and everything just worked. Since it's larger in both dimensions, all my old programs worked and I can reformat the displays at my leisure. One thing to keep in mind if you buy these: both the units had to have the contrast potentiometer on the back tweaked to make the display visible. I will definitely be buying more of these.
Geekcreit® IIC I2C 2004 204 20 x 4 Módulo de Exibição LCD de Caracteres Azul para Arduino
US$9.44 US$14.99
0
Recomendações
Comentários (0)
LEGOManiac 21/02/2018
My previous attempts to use micro sized stepper motors had been failing because the motor windings would come off when you tried to solder to the terminals. On these motors, everything went fine. I use them for switch and crossing gate motors on a model railroad under arduino control. I would definitely buy more if needed.
DC 5V 2 Phase 4 Wire Stepper Motor DC Motor
US$9.19 US$9.99
0
Recomendações
Comentários (0)
LEGOManiac 06/02/2018
I wish I'd had one of these years ago. The small compartments and moulded surface features are handy for keeping screws from rolling away.
S-170 480x318mm Silicone Pad Desk Work Mat Isolamento Térmico Plataforma de Manutenção para BGA PCB Solderin
US$31.17 US$39.99
0
Recomendações
Comentários (0)
LEGOManiac 06/02/2018
There's not much to say about them: they're strong magnets with a nice, polished finish.
5PCS 6x2mm Disc Neodymium Magnets Raro Earth Craft N35
US$5.99
0
Recomendações
Comentários (0)
LEGOManiac 05/02/2018
I finally got an adapter to allow me to plug my unpowered speakers (3.5mm adapter) into the amplifier. Some things I noted about this product: - I discovered when I first received it that the headphone jack is not powered. I had expected it to be. - Once I got an adapter for my speakers I discovered that there is a 4 second delay between when you power it on and when it produces sound. - On my unit, the sound cuts out completely if the bass is turned up above 80%. - The treble control works fine, though. - The sound isn't very deep which could be related to the bass control problem or it could just be my speakers, but I certainly don't notice any increase or decrease in bass as I turn the bass control, other than the cut-off problem. - The unit's power light is a tri-colour LED that gradually shifts colour. It's a bit distracting, frankly, and when I first plugged it in, it made me think there was a fault when it suddenly changed to red. That's a bit misleading until you realize that it's meaningless.
Stereo baixo amplificador Booster amp para casa mp3 motocicleta carro HiFi 12v 30w Mini
US$13.12
2
Recomendações
Comentários (0)
LEGOManiac 05/02/2018
What I really needed was a 3.5mm Female to wire connector so I could plug in an unpowered pair of speakers into a small amplifier. This adapter was cheap enough to cannibalize and long enough that I was able to use the other half as an RCA to wire adapter. If you do this, btw, you will need to tin the bare wire. It's extremely thin, probably not very useful for anything that's going to be flexed a lot, but it should do fine for a fixed installation.
Cabo Y de fone de ouvido de áudio AUX 3,5 mm fêmea para 2x RCA macho estéreo
US$7.99 US$9.99
0
Recomendações
Comentários (0)
LEGOManiac 29/01/2018
I finally got around to using this this week and it's a very convenient way to handle large numbers of servos. It's also a good way to just use one or two while freeing up pins on an Arduino.
3Pcs PCA9685 módulo controlador de motor servo PWM de 16 canais 12 bits I2C
US$17.24 US$17.99
0
Recomendações
Comentários (0)
LEGOManiac 29/01/2018
This has worked reliably and is quite intuitive. The only thing I would change is that it seem to want to choose between bluetooth connectivity and the MicroSD card. If the card is installed, it starts playing the MP3s that are stored on it without giving you the option of connecting to a phone. I would have preferred to be able to stop the MP3 player and use the phone at the push of a button. Instead, you have to take the MicroSD card out which is easly lost in a car.
Bluetooth sem fio FM isqueiro de carro carregador USB duplo Tomada adaptador de porta-copos adaptador de mão livre chamada
US$18.47 US$19.99
0
Recomendações
Comentários (0)
LEGOManiac 29/01/2018
There's not much to be said about this. It's a simple mounting bracket, but I would have preferred it if they had servo mounting hole more in the middle to allow the mounting bracket to be screwed down on both sides.
10PCS DIY SG90 9g Servo Bracket Fixed Base 34X35mm com parafusos
US$3.99
0
Recomendações
Comentários (0)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe