Todas as mensagens

Q: Does this support 6 esc’s/motors for larger drones?

perguntado por sheepjeep sobre 2020-07-01 09:34:52

simon21117 Yes there is support for 6 esc and motors. Output 5 and 6 are located in the middle of the board.

2020-07-02 11:58:27 Útil (0)
Enviar
respostas (6)

Q: can we connect the camera direct to fy03 rc car 1/12 transmitter? for the power

perguntado por ADMIRAL22 sobre 2020-03-18 07:15:47

simon21117 The camera runs of 1S power so you might need a Buck Converter to reduce power. Check tech spec for operating voltage.

2020-03-18 12:35:12 Útil (0)
Enviar
respostas (1)

simon21117 Not sure about the Bluetooth version. But I have used one with the speedybee app with a CC3D flight controller. From memory you need a TTL to USB to program it and lower the board rate to work with UART ports on esc. Try a search on YouTube for HC-06 and speedybee

2020-03-18 12:34:01 Útil (0)
Enviar
respostas (3)

simon21117 You might be better with a propper fixed wing FC. this can multiply UART connections. has builting Baro. check the Matekwebsite of search web for F722 fixed wing.

2020-02-28 07:59:29 Útil (0)
Enviar
respostas (2)

Q: out off stock?

perguntado por Putraatmaja sobre 2019-02-11 05:00:26

simon21117 Check with customer services or a different warehouse

2020-02-15 03:19:48 Útil (0)
Enviar
respostas (2)

Q: This has osd?

perguntado por Rixxxxx sobre 2020-02-11 02:36:54

simon21117 Not sure. Most OSD info you get would come from the flight controller. So if your FC has a output join it to the input.

2020-02-15 03:18:49 Útil (0)
Enviar
respostas (3)

Q: use it on my drone but it overheats! how can I solve that?

perguntado por BG411864516 sobre 2020-02-05 12:04:35

simon21117 Check the manual and lower the output down from the higher settings and do a range check on the ground of low altatude

2020-02-15 03:16:40 Útil (0)
Enviar
respostas (5)

Q: Can you use it with Eachine ev100?

perguntado por Flo.Weissi sobre 2020-02-15 02:21:41

simon21117 Check the channel frequency match but should work.

2020-02-15 03:14:54 Útil (0)
Enviar
respostas (8)

simon21117 Notsure what you mean by trigger.. if you mean once it gets GPS lock then you could take the switch feed on the side of the lock LED.. but i think this is multi function so might not work .. features of the GPS can be programed via a TTL USB and Arduino software.

2020-01-21 11:36:33 Útil (1)
Enviar
respostas (2)

Q: is there a spare arm for this? link please

perguntado por lordango sobre 2019-09-13 08:50:10

simon21117 Nospare arms is supplied. kit is that cheap an extra and keep it for spares

2020-01-21 11:33:43 Útil (0)
Enviar
respostas (2)