thegazzyb
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

thegazzyb 02/04/2019
Keep coming back to this little VTX. Use it on my micro builds. Better than any AIO. Obviously not the most powerful VTX out there but for the usual micro quad flying range perfectly adequate. Cheap and reliable. Unplug before using Betaflight if running >25mW because it heats up very quickly and is easily damaged. It comes with a plug in harness so if you use that it is easy enough to unplug it before doing your setup in Betaflight. Does a very decent job and fits almost anywhere ( can be cable tied to the top plate if all else fails ! ). Recommended.
Mini VTX5848 48CH 5.8G 25/100 / 200mW Switchable FPV RC Drone VTX Módulo de Transmissor de Vídeo OSD Control
17,21€ 21,42€
2
Recomendações
Comentários (0)
thegazzyb 08/06/2018
OK, this set wasn't cheap but you can't argue with the quality. I bought this to work on my RC quadcopters and it has made working on them 10 times easier than with the previous assortment of odd tools I had lying around. The heads of the wrenches and drivers seem very hard and strong. They remove allen bolts which were previously a struggle with ease. No wear on the wrench and driver heads so far. This set contains all the tools in all of the sizes I need and comes in a nice carrying case which is easy to take with you. Effectively this is a mobile quad workshop, just add an XT60 soldering iron and you can repair just about anything in the field. Love it. Expensive but so far worth it ! Thanks BG !
YZ Conjunto de ferramentas de reparo de chave de fenda hexagonal 18 peças Alicates Abre-furos Bandeja de parafusos
117,30€ 122,06€
3
Recomendações
Comentários (0)
thegazzyb 31/05/2019
Fantastic ! Arrived here within one week ( EU Warehouse ). My first 3D printer. Assembly was straight forward enough thanks to the excellent instructions ( if you get stuck, watch the exploded view video (.wmv file ) supplied on the memory card - between the video and the printed instructions I was always able to figure out what I was supposed to do next ! ). Take time when assembling the printer and try to enjoy the process. Finally take time to level the bed before printing. So far I have printed the dog.gcode file which came on the SD card ( photo below ) supplied with the printer. As you can see, Creality only deliver enough PLA to print just over a third of the whole model, so if you want to test your printer with the dog.gcode model, you will need to insert your own larger roll of filament. The photo below is as far as I was able to print before the filament ran out. I am now waiting for more filament to arrive but even after this first print I can say that this printer is awesome. The quality of the surfaces is so smooth and shiny, hard to imagine any other printer doing any better. Best value printer with this quality BY A MILE ! Don't be afraid if it's your first printer, good results are just a little bit of patience and care away ! If you get stuck, search on the internet, there are plenty of videos about this printer out there ! Best purchase ever !
Impressora 3D Creality 3D® Ender-3 com tamanho de impressão de 220x220x250mm e função de retomada de energia
269,31€ 465,00€
0
Recomendações
Comentários (0)
thegazzyb 02/04/2019
Have been looking for an alternative to the agonisingly slow charging NiMH battery pack for convenience. Needed an adapter to XT30 to fit this on my charger but after that I no longer need to use the special cable I made for the old NiMh battery pack ( no more unplugging and swapping around between LiPo and NiMH !!! ). Comes with a balance lead AND the connector for inside the QX7, so if you can adapt the battery connector to fit your charger you now have a nice LiPo for your QX7. Same capacity as the old NiMH packs but much faster charging and generally easier to deal with since you no longer need to use a different charging program in your charger just for the NiMH pack. If it lasts as well as I expect, this will prove to be THE solution for powering your QX7.
Bateria de Lipo de 7.4V 2S 2000mAh 8C compatível para o transmissor Frsky ACCST Taranis Q X7
20,04€ 34,70€
0
Recomendações
Comentários (0)
thegazzyb 05/08/2019
Very good
Bomba sem corda portátil do compressor de ar de USB do inflador elétrico portátil do pneu de 2200mA 120W 12V com LED
37,18€
1
Recomendações
Comentários (0)
thegazzyb 05/10/2018
I bought the PNP version since I have several XM+ receivers here. This is where my problems started ! In order to fit the receiver you have to remove the top plate. The screws securing the top plate were ridiculously tight and they were screws of low quality with an inaccurate hex head size, meaning that it was hard to get purchase with a 1,5mm hex driver. I managed to remove two of the four screws with my hex driver but two were in so tightly that I managed to snap my 1,5mm hex driver in half trying to remove the third one. Since I had no better hex driver in my collection I was forced to Dremel the heads off of the two remaining screws and could then finally fit my receiver ! After that I replaced the top plate using my own screws of better quality and with the correct 1,5mm head size. Unfortunately the top plate is now somewhat scratched from my dremeling but at least I could fit and bind my receiver. Once in the air, this quadcopter flies beautifully out of the box. Very smooth on 3S and plenty of power. Haven't tried 4S yet. To avoid problems with removing the top plate I would strongly recommend you buy the BNF version !!! This would have saved me four hours labour ! I have heard other reports of the screws for the top plate being overtightened and hard to remove so I don't think mine was an isolated incident. ALSO when you do your Betaflight setup, ensure that the OSD is set to PAL format. I had it set to NTSC like all my other quads and had no OSD in my goggles. After Googling I discovered that you have to set the OSD to PAL in Betaflight. This also cost me a lot of time, checking wires, re-soldering wires only to find in the end that this setup insists on having PAL OSD. A great drone, best I have, my new favourite. Just ruined by overtightened poor tolerance hex screws in the top plate. Just buy the BNF and save yourself the grief of having to remove the top plate.
HGLRC XJB-145MM FPV Racing Drone PNP Omnibus F4 28A 2-4S Blheli_S ESC 25/100/200 / 350mW Comutável VTX
149,09€ 227,62€
1
Recomendações
Comentários (1)
thegazzyb 05/08/2019
very easy to set up and use
[Versão Internacional] IMILAB Xiaobai H.265 1080P Smart Home Câmera IP 360° PTZ AI Detecção WIFI Monitor de Segurança do Eco-system
48,42€ 55,90€
0
Recomendações
Comentários (0)
thegazzyb 05/08/2019
very useful
12V Portátil 100W 160PSI Conjunto de Bomba de Lavagem Automática Limpador Elétrico Automóvel Pressão Alta
68,87€ 71,74€
0
Recomendações
Comentários (0)
thegazzyb 18/06/2019
It's an XM+, what's not to like ? Full range receiver, would lose VTX signal long before this failsafes you ! Very good and light receiver.
FrSky XM Plus Micro D16 SBUS Receptor de RC Mini de Alcance Total de até 16CH para Drone de Corrida RC FPV
22,50€ 27,95€
0
Recomendações
Comentários (0)
thegazzyb 18/06/2019
Does a good job on micros.
Lumenier Micro AXII Shorty U.FL 5.8 GHz 1.6dBi FPV Antena RHCP / LHCP Para RC Drone
23,57€ 25,71€
0
Recomendações
Comentários (0)
thegazzyb 18/06/2019
Very good VTX for micros, decent range on 200mW
Runcam TX200U 5.8G 48CH 25mW/200mW Transmissor de vídeo FPV VTX Suporte Betaflight FC para Drone RC
23,67€ 24,59€
0
Recomendações
Comentários (0)
thegazzyb 18/06/2019
Bought these for my Diatone GT R349 and they work well, seem efficient, good flight times.
2 Pares de hélices Dalprop Cyclone T3056C 3056 3x5.6 3 Polegadas 3 pás para Drone RC FPV Racing Multi Rotor
5,35€ 4,65€
0
Recomendações
Comentários (0)
thegazzyb 02/04/2019
Cheaper replacement for original Lizard 105S props.
10 Peças Racerstar 2435PRO 2,4 Polegadas PC Hélice de 4-lâminas Furo de Montagem de 1.5mm para RC Drone FPV Corrida
12,91€ 13,97€
0
Recomendações
Comentários (0)
thegazzyb 02/04/2019
Works well for generic action cameras too. Soft material supplies some vibration damping. Will probably buy another for another quad.
Suporte de câmera macio impresso em 3D GE-FPV TPU de 30° para XIAOYI/Gopro
19,36€ 20,12€
0
Recomendações
Comentários (0)
thegazzyb 02/04/2019
Does what you would expect it to do :) Useful to increase usage options of Lipos you may have which normally would not fit your quad.
Adaptador de conector de bateria LiPo 2S 7.4V XT30 para plugue macho e fêmea JST
7,52€ 8,38€
0
Recomendações
Comentários (0)
thegazzyb 02/04/2019
Seem to work fine. Obviously these are short antennas so you need to ensure there are no obstructions to the signal when fitting to your quad.
Antena Realacc Pagoda RHCP 65mm 5.8G 5dBi Placa de Painel de Antena Direcional Omni FPV de Curto Alcance para Drone RC
6,43€ 18,07€
0
Recomendações
Comentários (0)
thegazzyb 02/04/2019
Arrived quickly with no damage. Works as expected and represents good value for money.
Eken câmera para esportes de ação H9R 4k Ultra HD 2,4 g remoto wi-fi 170 graus grande angular
67,50€ 70,81€
0
Recomendações
Comentários (1)
thegazzyb 01/03/2019
Very nice, compact and good quality. Use it more often than I imagined
Mochila Xiaomi 10L Travel Light Peso leve Tamanho pequeno Mochila Unissex Sacos esportivos casuais no peito
14,90€ 37,27€
0
Recomendações
Comentários (0)
thegazzyb 01/03/2019
Very useful
Raitool™ HT05 10 limas de cerâmica emery com agulhas de diamante, ferramenta de corte e moagem
9,67€ 10,24€
0
Recomendações
Comentários (0)
thegazzyb 01/03/2019
Very useful
Organizador de bolso em couro PU para o lado esquerdo do porta-objetos do banco do carro
26,89€ 27,95€
0
Recomendações
Comentários (0)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe