Todas as mensagens

Q: Is it good for Cemented/Concrete/Brick wall?

perguntado por Anjan_Mukho sobre 2020-11-20 07:44:24

Aurum No, this is for metal. For stone you need a drill with carbide tip.

2020-11-20 08:04:26 Útil (0)
Enviar
respostas (4)

Aurum@Alexandre It\'s been a while, but I believe I\'ve changed a resistor in serial to the potentiometer to allow a voltage range less than 5V. In other words changed the ratio of the voltage divider between Vout and the feedback line (potentiometer variable pin).

Aurum 2019-11-15 11:09:26
1
Comentários (3)

Aurum Please see the detailed answer above.

2020-11-09 09:37:56 Útil (0)
Enviar
respostas (1)

Q: Hi, What arduino libraries do i need to use this. Thanks

perguntado por BG527338105 sobre 2020-09-30 09:26:10

Aurum Use MCUFRIEND_kbv - install it from the library manager. Steps to make it work: 1. Arduino\libraries\MCUFRIEND_kbv\utility\mcufriend_shield.h - uncomment the first line: define USE_SPECIAL 2. Arduino\libraries\MCUFRIEND_kbv\utility\mcufriend_special.h - uncomment define USE_MEGA_8BIT_PORTC_SHIELD 3. load examples\graphictest_kbv.ino, find if (ID == 0xD3D3) ID = 0x9481; and replace it with if (ID == 0xD3D3) ID = 0x7796; 4. compile, it'll work. Related discussions: forum.arduino.cc *slash* index.php?topic=711166.0 and forum.arduino.cc *slash* index.php?topic=658248.15 sorry you'll have to convert those to valid urls because it's not allowed to post them..

2020-11-09 09:37:03 Útil (0)
Enviar
respostas (2)

Q: 1. what is the clamping range? 2. can I attach regular drill bits?

perguntado por MannySaunders sobre 2020-10-21 11:48:48

Aurum The range is minimal as it's meant to lock on the rectangular end part of the drill taps. You can put drills in it but why would you? It's not a chuck. Use a proper tool for that.

2020-10-21 02:40:33 Útil (0)
Enviar
respostas (1)

Q: When powered by a common light switch, would it light up automatically?

perguntado por Aurum sobre 2019-08-14 05:30:17

BG201412401 Funciona no 110 v?

2020-09-27 01:25:20 Útil (0)
Enviar
respostas (4)