DuMOHsmol
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

DuMOHsmol 26/02/2018
Well, the camera works, but actually isn't a CCD camera at all! And even more, the picture quality is worse than on cheaper and lighter micro cams! The stock lens has a narrow angle, the colors are washed out, and the picture is full of oversharping artifacts. Take a look my comparison with Kingkong mini camera. The Eachine is clearly inferior here, and the picture is even worse in movement because of oversharping. Do not recommend!
Eachine 1000TVL 1/3 CCD 110 Graus 2.8mm Lente Tensão Larga 5-20V Câmera Mini FPV NTSC PAL Comutável
US$10.15 US$22.79
8
Recomendações
Comentários (1)
IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 Módulo TX multiprotocoloo 4 EM 1 para Frsky X-lite
US$32.99 US$63.99

Q: Is it compatible with BetaFPV LiteRadio 3 Pro?

perguntado por DuMOHsmol sobre 2022-09-11 10:22:15

Mauro yesit is copatible

2022-09-21 02:38:47 Útil (1)
Enviar
respostas (1)
DuMOHsmol 26/02/2018
These are the most aggressive 3mm props for 11xx motors that I could find. They work great with 2S-3S battery and 1106-6000KV motor.
2 Pares de Hélices Gemfan 3035 3X3.5 BN de 3 pás, com furo de montagem de 1.5mm, para motor 1104 1105 RC Drone FPV Racing
US$8.07 US$8.99
1
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.
KINGKONG / LDARC 130GT 130 mm Fibra de carbono FPV Racing Frame w / 5V 12V PDB para RC Drone
US$11.11 US$14.24
4
Recomendações
Comentários (2)
DuMOHsmol 12/10/2018
The bundled screws were too long. They damaged the windings and three of four motors have stopped working. I did not expect that the screws lying in the same bag with motors would need shortening! A complete disappointment!
4X 1102 11500KV 1-2S Motor Brushless & 4 Pares de 1535 hélice para RC Zangão FPV Corrida
US$19.99 US$40.35
0
Recomendações
Comentários (2)
DuMOHsmol 12/10/2018
I was pleasantly surprised to find that it has mounting holes for both 16x16 and 20x20 FCs.
Happymodel Toad90 90mm Micro 3 K Fibra De Carbono FPV Racing Quadro Kit com Montagem Da Câmera de Alumínio CNC para RC Drone
US$14.26 US$21.38
1
Recomendações
Comentários (0)
DuMOHsmol 12/10/2018
Bought them for 90mm quad, but did not have chance to test because of broken motors.
4 pares de hélices de 3 pás Gemfan Hulkie 2040 2.0X4.0 PC CW CCW para motor 0806-1105 de drone de corrida RC FPV
US$4.19 US$9.99
0
Recomendações
Comentários (0)

DuMOHsmol Ooop, I guess I'm really late. My setup is:Frame: Kingkong 130GTMotors: D1106 6000KVESCs: Racerstar RS11APropellers: Gemfan 3035 3X3.5 BN 3-bladeBattery: ZOP Power 7.4V 850mah 70C 2SFlight controller: SP Racing F3 EVOHere is some fpv footage: https://www.youtube.com/watch?v=hzK-0hkHZpE

DuMOHsmol 26/02/2018
Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.
KINGKONG / LDARC 130GT 130 mm Fibra de carbono FPV Racing Frame w / 5V 12V PDB para RC Drone
US$11.11 US$14.24
4
Comentários (2)
DuMOHsmol 26/02/2018
Works fine on Kingkong Q100 frame. However, It doesn't fit stock mounting latches on this frame, so I had to cut latches off and use the two-sided sticky pad.
Eachine placa de controle de vôo escovado com base em F4 Revolutio para o frame fpv micro Openpilot CC3D 32bits
US$16.99
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
Perfect for PCB mounting in quadcopters. There is also a nice plastic box with detachable sections.
Suleve™ M3NH1 M3 Nylon Parafuso Porca hexagonal preta Nylon Kit de sortimento de PCB 300 peças
US$12.69 US$13.99
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
I couldn't find black ones in the shops around me, but banggood has rescued me once again.
100pcs cabo de auto-travamento de cabo de nylon laços zip envoltório prenda fio
US$2.49
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
It does glow in the dark, but it's dim and fades quickly! I've expected something a little bit longer and brighter.
Dancingnail Halloween Fluorescente Neon Pure Candy Color Luminous Unhas Polonês Não-tóxico Glow In Dark
US$3.48
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
OK-ish syringes with extremely useful tips. I use these for soldering flux dispensing.
20CC-30CC Seringa SMT SMD PCB Pasta de Solda Cola Cola Dispensador Líquido
US$9.23 US$9.99
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
Bought this to make an upgrade for my EV800 goggles. Works fine!
Eachine ProDVR Pro DVR Mini Gravador Vídeo Áudio para Multicópteros FPV
US$16.05 US$21.11
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
But be careful with the landing legs! Not every frame will fit these. Kingkong 130GT doesn't, so I've had to cut the landing gear off.
4 PCS KINGKONG / LDARC Universal Motor Tampa de Montagem de Proteção com Trem de Pouso para 11 Series Motors RC Drone
US$3.11 US$3.73
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
At first I was really skeptical about these rubber standoffs, but they do work indeed! Once I've mounted my FC on these, the gyroscope has finally stopped from getting mad on Z-axis. I only wish there were some cheaper bulk offers, I would rather buy more of these in one time!
4 PCS Realacc M3*7+4,5 Parafusos Fixos Anti-Vibração Controlador de Voo para FPV Racer
US$9.23 US$9.99
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
None of the reviews does mention the weight, so here it this. This PDB turned out to be a little heavy for my 130mm build, so I haven't used it yet. The soldering quality seems to be fine.
Placa de distribuição de energia Lantian PDB com saída BEC 5V 12V 3A para CC3C Naze32 versão atualizada para drones RC de corrida FPV
US$11.54 US$11.99
0
Recomendações
Comentários (0)
DuMOHsmol 26/02/2018
Well, after replacing one broken motor, I found that these motors are quite fine! I still can't decide whether it was broken from the factory, or it was my fault, so I can't comment anything on the quality here. These motors seem to play fine with 3035x3 propellers and 3S battery, getting only slightly warm (but I haven't tested on full throttle yet, though). They also provide enough punch on 2S to make flying fun. Some people say that the shaft of these motors may back out, so I suggest drilling out the center hole on your propellers (a 1.6mm drill works perfectly). This way you won't apply force to the shaft when putting your props on and off.
Realacc Orange85 FPV Racer peça sobressalente 1106 6000KV 1-3S motor sem escova for RC Drone FPV Racing
US$8.99 US$9.64
1
Recomendações
Comentários (1)
DuMOHsmol 26/02/2018
The protectors are fine, but I wish there were no holes on the sides, as they clearly decrease the mud protection!
Capa de proteção preta para motores universais KINGKONG/LDARC, 4 peças, para drones RC da série 11
US$8.07 US$8.99
0
Recomendações
Comentários (0)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe