Todas as mensagens

BG110818143 Update to previous review - Battery never reached more than 4.19vdc but after installing the buzzer and the welding probes, it works very well on several test welds. My unit has an LED that remains blue all the time, so it is difficult to know what power level I have selected. Box was not very useful as shipped, but after modification and adding a removable lid (to allow access to selector/power switch) I am happy enough with the unit. It is a kit, after all.

BG110818143 31/12/2020
0
Comentários (1)

Q: does this come complete, ready to use?

perguntado por JamesCiampi sobre 2020-05-18 06:49:00

BG110818143 No, you will need to solder into place the included buzzer and then install the negative and positive welding leads. Make sure you install the negative lead using the included flat machine screw so it doesnt damage the battery pack on reassembly. I also put some 0.125" foam tape over the solder joints of the buzzer after cutting them flush, just in case. Also, the included case was not very useful, so I cut one of the end plates in half and made a lid that could be removed to allow me to use only half the case supplied. Removing the lid allows access to the pushbutton on the board.

2021-01-01 01:44:29 Útil (0)
Enviar
respostas (4)