Melhores ofertas para Módulo sem fio,Bateria,Verificador de bateria - Banggood Portugal Compras on-line

Ivan

Meu conteúdo: Todas as mensagens; Comentários; Comentários; respostas; Questões

Todas as mensagens

Módulo sem fio Geekcreit® NRF24L01+PA+LNA de longa distância de 1100 metros com módulo de antena

5,53€ 10,14€

Q: do you have c code source to drive this device? How does one interface a host to this device?

perguntado por Ivan sobre 2020-06-08 02:38:33

tontze its called zigbee2mqtt, go to www zigbee2mqtt io

2020-06-08 09:48:01 Útil (2)

Enviar

respostas (2)

Ivan 20/08/2020

Great product, works as expected

Caixa de armazenamento de plástico para 4 baterias 18650 de 3,7V com 8 pinos

4,60€ 7,37€

0

Comentários (0)

Ivan 21/02/2020

I received this device. Characters are barely readable. Display has black streak in bottom right corner. i reccommend you do not buy this item. Seller has not responded to private emails to try to correct the situation.

Verificador do sinal do receptor do verificador da tensão de URUAV MC-6S 1-6S Lipo Bateria

15,91€ 20,29€

0

Comentários (0)

Ivan 29/12/2019

This device does not seem to comply with specifications. It does not read all the time. In my case, most of the time it indicates Err instead of cell voltages. I use it LTO cells, the spec says it should read cell voltages between 0 and 5Vdc. I don't know how to fix this situation and the supplier is of no assistance. I have a feeling the supplier is a box mover and has no clue how this device should work, so this supplier is unable to help me. I have the impression this product has a software problem. Otherwise this product comes well packaged and presented. If it's available, I would welcome help from the manufacturer in solving this "Err" problem.

SKYRC LiPoPal Autobalanceador de Voltagem LiPo 2-6S para Verificação de Voltagem da Bateria

27,70€ 29,51€

0

Comentários (0)

SKYRC LiPoPal Autobalanceador de Voltagem LiPo 2-6S para Verificação de Voltagem da Bateria

27,70€ 29,51€

Q: I just received the SK500007 device. When I connect it, shows "err" 5 times instead of the 5 cell voltages. There are no instructions on how to connect for a 5s setup. I checked the voltage at each pin with a multimeter, all seems normal. I know the voltage is low, around 2.5 volts, it's fine for LTO cells (1.7 to 2.8 volts). The specs say the voltmeters can read from 0 to 5 volts. Is this device defective? Is there a way to change this "err" behaviour?

perguntado por Ivan sobre 2019-11-13 02:56:04

Lamella Could you send the video to us? Then we will try our best to help you.Pls contact us.https://www.banggood.com/Contact-Us_hi111

2019-11-30 01:32:04 Útil

Enviar

respostas (1)