inventorJS
Q: how large of a battery can I fit into the model (mm)?
perguntado por inventorJS sobre 2021-12-02 05:17:44
BG111416223 length= 140-145 mm (don't use battery longer than 140 because you have to fit wires), height =35 mm, width= up to 140 mm (you would not want to because you need to fit electronics) up to 70 mn would be possible. Without any fpv gear it would need a battery of about 475-500 gram to balance to specification. After testing:CG marks are correct, I now use a 450g 4S LiPo battery and 100 gram fishing lead up all the way in the nose where a camera should be. NO WAY WILL THE RECOMMENDED BATTERY PACK BALANCE THIS WITHOUT ADDING A LOT OF WEIGHT. use a heavier battery if you can in stead of lead weight that does nothing useful !
2022-04-27 02:46:34 Útil (0)Q: How long is the 6 pin wire?
perguntado por inventorJS sobre 2021-09-30 09:56:34
TheGamma son unos 10cm de largo
2022-04-03 04:54:52 Útil (0)Q: What is the overall size of the camera with the bracket on?
perguntado por inventorJS sobre 2020-03-29 02:18:04
Hobb7 the bracket gives around 1.3mm on each side
2022-03-09 11:14:44 Útil (0)
Q: How can I use this in Australia? Because there is 240V here and the power adapter will burn out
perguntado por inventorJS sobre 2017-11-04 10:25:10
BG351738321 Maybe you need to buy a AU plug adapter？ .
2022-02-08 11:08:55 Útil (0)
jaegermztr do you a c10 rated card? anthem anything less and it won't record properly. and if card is over 16GB it won't work right.
2020-07-02 12:57:06 Útil (6)Q: what is the ipex connector type/size?
perguntado por inventorJS sobre 2020-11-23 05:31:02
TheGamma El IPEX4, pero ya viene con la antena de serie
2022-01-13 08:53:41 Útil (0)
inventorJS Idon't believe that it comes with external tx module for the JR bay, they are just for indication that they are compatible with the radio.
Q: would this work with the ender 3 pro??
perguntado por inventorJS sobre 2020-09-12 10:27:17
deancowan the mounting bracket holes do not line up with a stock 760mm belt on an e3d pro.
2020-11-20 10:32:31 Útil (1)Q: Will this work with the 2018 R9M module?
perguntado por inventorJS sobre 2020-11-23 04:43:26
BG101865721 yes
2021-10-27 03:01:20 Útil (0)Q: When will the tx module be back in stock?
perguntado por inventorJS sobre 2021-10-06 05:32:56
dengjunbao it still need some time
2021-10-07 02:15:33 Útil (1)Q: How well does it achieve connections with satellites?
perguntado por inventorJS sobre 2021-09-30 06:59:51
Mike_Kaso 40-60s cold start 30-40s hot start 20-30s to lock while flying all the above are my experience from a single piece and not a rule that applies to all.
2021-10-04 06:33:04 Útil (0)Q: It does not give all inputs on FSi6 how do i fix it?
perguntado por inventorJS sobre 2017-12-24 08:11:22
edgarcorreaventas idont now
2021-09-21 07:38:00 Útil (0)Q: Does it have an internal battery?
perguntado por inventorJS sobre 2021-01-04 07:13:56
Scott Not sure but it retains satellites super well!
2021-03-07 10:06:29 Útil (1)
Q: Does the kit come with any FC or esc mounting screws (hardware)?
perguntado por inventorJS sobre 2021-01-04 06:58:57
MRT Comes with four screws for the centre 30,5mm mounting stack. And 6 nylon nuts as well, but that's not enough for ESC and FC. I recommend buying at least some more nylon nuts. If you want to use 20mm M2 stack or both 30,5mm M3 stacks you need additional screws.
2021-04-29 03:38:51 Útil (0)Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!
Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.
Ajude os outros e seja mais feliz!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
guglielmon circa8 cm
2022-06-27 01:46:30 Útil (0)