Todas as mensagens

Q: how wide is it ?

perguntado por BG164036221 sobre 2021-07-25 12:12:57

dirkm The LED strip has a width of 10 mm.

2021-07-26 02:58:01 Útil (0)
Enviar
respostas (3)

Q: My laptop doesn't have a HDMI port. Can I still use this screen?

perguntado por BG324525565 sobre 2021-04-25 08:55:28

dirkm This display has only a HDMI input. It cannot be used for your laptop lacking a HDMI port, unless you use a converter. Probably SKU 1036357 would fit your needs, at this has also VGA input.

2021-04-29 02:39:41 Útil (0)
Enviar
respostas (3)

Q: is type a the 5 inch display?

perguntado por Malcom sobre 2021-01-29 03:34:42

dirkm Thisis a 7 inch display. Mine had a resolution of 1024 x 600 pixels. Check type to order, as this also exists with a 800x640 resolution.

2021-02-04 01:50:01 Útil (0)
Enviar
respostas (2)

Q: push ad lock or not? it’s normaly open or normally closed?

perguntado por BlackMambaTattoo76 sobre 2021-01-01 07:48:57

dirkm Thisis a push button, so no lock.

2021-02-04 01:48:39 Útil (0)
Enviar
respostas (1)

Q: what connection is this powered through?

perguntado por BG332318122 sobre 2020-11-13 08:46:38

dirkm I powered it with 5V DC. It then draws 0.35 Amps. It uses a standard DC jack 5.5 x 2.1 mm (see SKU 39991).

2020-11-16 10:53:01 Útil (2)
Enviar
respostas (2)

Q: How long or the length of this

perguntado por BG894156385 sobre 2020-10-30 05:06:18

dirkm The spindled the rods are 400 mm long.

2020-11-01 05:21:58 Útil (0)
Enviar
respostas (7)

Q: How many starts?

perguntado por yaron3010 sobre 2020-09-19 09:32:26

dirkm There are 4 starts. For every revolution of the treaded shaft, the nut will feed 8 mm.

2020-10-11 04:23:44 Útil (0)
Enviar
respostas (3)

Q: 220 v? avaible?

perguntado por Alberto GI sobre 2020-10-06 02:48:00

dirkm You have to put yourself a LED strip in the profiles. Those LED strips usually operate at 12V, which is supplied by a power supply operating at 220V.

2020-10-06 02:05:05 Útil (0)
Enviar
respostas (4)

Q: Can I use this without connecting a neutral wire?

perguntado por caseydealsstore sobre 2020-06-14 07:27:21

dirkm The module needs two wires, one line and one neutral, or two lines. This to power the integrated wifi-module (ESP8266). The module can be controlled by a normal switch (SPDT) or a push button (SPST), configurable from the app.

2020-07-27 01:42:08 Útil (1)
Enviar
respostas (10)

Q: What connector does the motor use?

perguntado por Mylan719 sobre 2020-05-15 09:51:51

dirkm I used the connector with leads which came with the motor. The Excellway DH32 (sku 1128311) does not fit.

2020-05-17 01:12:42 Útil (0)
Enviar
respostas (1)

dirkm If you look for the dimensions of the different parts, then google for the next: "sk8 dimensions", "sbr8uu dimensions", "scs8uu dimensions".

2020-05-04 01:52:05 Útil (1)
Enviar
respostas (5)

Q: Is it normal for the green light to flash every 40 seconds?

perguntado por roberto2155 sobre 2020-04-29 04:27:03

dirkm The green light indeed does flash every 40 seconds. I've got 3 of them, all doing the same. They are all connected to the RF Bridge (SKU 1179900).

2020-04-29 08:33:50 Útil (0)
Enviar
respostas (3)

Q: Can this be used on the Anet A8 printer?

perguntado por dirkm sobre 2019-06-12 04:51:58

Yanny It does not test with A8 printer

2019-06-24 03:28:42 Útil (1)
Enviar
respostas (1)