Kris
Meu conteúdo
Todas as mensagens
Comentários
Comentários
respostas
Questões

Todas as mensagens

Kris 27/10/2023
Overall a decent fence, however, there are a couple of material issues as well as design issues. 1. Fence stops pieces are made of aluminium base and plastic composite stop piece. The bolt-washer combo which holds the stop piece is undersized for this stop. As a result, it bends easily even with not much force. This is a bad design in combination of a poor choice of materials. 2. The fence micro adjusters are badly designed (too small) and also they cheaped out on the connection design which is done by a bolt-plastic slot combination. It works, but it is not convienient to use and the slack in the connection is huge. I chose not to use it at all. 3. The big stop bolt system has an aluminium turn head but base is plastic. Works, but have to be careful not to break it by tightening the bolt with too much force. Aluminium base part should have been used instead.
ENJOYWOOD Wnew Mesa de fresagem de madeira com sistema de cerca de perfil em alumínio de 700 mm com suportes deslizantes e proteção de broca
US$179.99 US$399.99
1
Recomendações
Comentários (1)
Kris 09/11/2023
Quality control of packaging is bad. I ordered 12 tracks. 1 out of 12 came in without being properly packed with missing screws and end damaged because of missing the wrap package. I would give this a 3-star rating, but they would filter it out.
1 Peça 800mm T-slot T-tracks Ferramenta de encaixe para mesa de roteador
US$19.99 US$18.99
0
Recomendações
Comentários (1)
Kris 07/11/2023
The quality is acceptable. The packaging was a bit sloppy. Whoever packed this thing did put the loose steel bolts with a same slot with the miter gauge and it got some cosmetic damage. Otherwise its OK. The only problem I have with its functionality is that the right side is 90 degrees. That means it cant do 45 deg cuts without offseting. This can be annoying for many. I would have preffered it to be 45 deg.
HONGDUI HD-MG21 Medidor de Esquadro com Cerca Estendida para Serra de Mesa e Mesa de Roteador de Carpintaria Ajuste de Ângulo de Precisão
US$255.99 US$399.99
0
Recomendações
Comentários (1)
Kris 27/10/2023
Good tool. Quality as expected. Keeps its 90degree angle when tightened.
ENJOYWOOD Esquadro combinado de liga de alumínio ajustável de 300 mm com ângulo de 45 e 90 graus, Ponteiro de aço e régua de madeira para marcenaria, Ferramenta de medição para carpinteiro DIY
US$9.99 US$25.99
0
Recomendações
Comentários (0)
Kris 27/10/2023
Good tool. Quality as expected. I little pricy, but well worth it.
Plaina de chanfrar HONGDUI para marcenaria com 3 Insere de Carbeto de Tungstênio Substituíveis, Duplo Cortador de Canto para Corte Rápido de Bordas de Madeira
US$63.99 US$99.99
0
Recomendações
Comentários (0)
Kris 27/10/2023
Good tool. Quality as expected for the price.
Nova serra de mesa 3D Bloco de empurrar Bloco de empurrar de segurança para serra de mesa de marcenaria
US$69.99 US$79.99
0
Recomendações
Comentários (0)
Kris 26/10/2023
The price is a bit much, but the product is well made. A couple of issues when assembling. a. for some wierd reason a 10mm wrench was included. That was useless, since there is no 10mm bolts or nuts on this thing. Intead there should have been a PH3 screwdriver. b. One steel slider insert had a very bad thread and I was forced to make a new one for it. Luckily I had a right tools for it. I calibrated by making an actual cut and adjusted brackets according to the real outcome. This is a better way to get accurate calibration. When in full lenght the tool was off by 1mm at 1200mm mark. So I had to sand two outer pieces a little shorter to make it fully accurate. When all that was done, everything worked fine and the cuts were up to 0.3mm accurate for all lengths. Overall I am happy with it.
Sistema de guia paralela em liga de alumínio aprimorado ENJOYWOOD para cortes repetíveis em trilho de serra adequado para ferramentas de marcenaria Makita e Festool. Atualização do gancho
US$129.99 US$199.99
0
Recomendações
Comentários (1)
Stack Geprc Stable Pro F7 com controlador de voo dual gyro de 20x20mm e ESC 4in1 BLheli_32 de 35A e VTX 5.8G de 500mW para drones RC de corrida FPV
US$162.75 US$150.00

Q: The length of the m2 bolts?

perguntado por Kris sobre 2019-08-05 02:07:04

Alvaro Navarro puedes hablar en espanyol?

2020-02-19 12:19:56 Útil (0)
Enviar
respostas (1)
Kris 25/07/2019
Fine props. 0.4g and work well
Happymodel Sailfly-X Peça De Reposição 6 Pares 65mm 2-Blade Propeller w / 1.5mm Furo De Montagem para RC Zangão FPV Corrida
US$9.23 US$9.99
0
Recomendações
Comentários (0)
iFlight SucceX mini F7 TwinG V3 F722 Controlador de Voo & 35A 2-6S DSHOT1200 ESC & pit / 25/100/200/500 VTX
US$92.69 US$101.97

Q: The length of the m2 bolts?

perguntado por Kris sobre 2019-08-05 02:07:15

tiemfpv about 20mm

2019-08-14 10:21:35 Útil (0)
Enviar
respostas (1)
Kris 25/07/2019
Works as advertised.
Runcam Racer Nano CMOS 700TVL 1.8 mm / 2.1 mm Super WDR menor FPV câmera 6ms baixa latência gesto controle integrado OSD para FPV Racer Drone
US$35.86 US$38.39
0
Recomendações
Comentários (0)

Você é o especialista, pode ajudar?

Sinceramente, o convidamos a se inscrever para receber o e-mail de resposta ao convite!

Se você se inscrever, nós o convidaremos por e-mail para responder a perguntas que as pessoas tenham sobre os produtos. Ao se inscrever, você] também ganhará o "Emblema de útil "! Você pode cancelar a assinatura a qualquer momento na página de configurações de privacidade.

Ajude os outros e seja mais feliz!

  • Se inscrever

Sobre crachás

Os crachás estão relacionados à comunidade e os usuários ganham crachás criando conteúdo de qualidade, completando missões ou participando de atividades especiais. Pessoas específicas também terão seu crachá exclusivo.
Crachá do CEO

O Distintivo do CEO pertence apenas ao chefe da Banggood.

Os crachás que pode ganhar está chegando em breve
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe