The seller Hello friends, the product packaging has a QR code, scan the code to download the software

Obtest In addition to the description on the detail page, We donot provide extra technical support for it. We donot have manuals with English version. Please make sure you know how to config it before purcha... In addition to the description on the detail page, We donot provide extra technical support for it. We donot have manuals with English version. Please make sure you know how to config it before purchasing. Ver mais

Thisred There are two modes in total, one is the main mode and the other is the parameter input mode 1. Enter the main mode as soon as it is powered on. In this mode, the upper row of digital tubes displays ... There are two modes in total, one is the main mode and the other is the parameter input mode 1. Enter the main mode as soon as it is powered on. In this mode, the upper row of digital tubes displays the value of D110, and the lower row of digital tubes displays the value of D114. The button switch controls the closing and opening of the corresponding intermediate relay (M), and the indicator light controls the on and off according to the closing and opening of the internal intermediate relay (M). Press the SET button for 3 seconds to enter the parameter input mode. 2. In the parameter input mode, the value after D200 of the data register can be changed. The upper row of digital tubes (dual-row digital tube board) or the left two-digit digital tubes (single-row digital tube board) are used to display the data to be changed. The number of the register can be changed by pressing the upper triangle button (increase) or the triangle button (decrease). When changing, the value read out will be displayed on the lower row of digital tubes (dual-row digital tube board) or the right 4-digit digital tube (Single-row digital tube board) is displayed, and the value can also be changed with the UP key and DOWN. Note: When the single-row digital tube enters the parameter input mode, the d0 displayed on the left corresponds to the D register of the PLC as D200. The d1 shown on the left actually corresponds to the D register of the PLC as D201, and so on. After changing the value, press th Ver mais

Buttonwas If you have any problems about it, you can contact BG customer service for help